HYRIG can supply the JL series choke valve range and its replacement parts. The JL series are used to form choke manifolds or Christmas trees, adjusting the flow area to regulate flow and pressure. They are manufactured to API 6A and API 16C standards, available in adjustable (K) and fixed (G) designs, with manual or hydraulic actuation.
| Model Number | Spec (mm) | Pressure (MPa) | A (mm) | B (mm) | Connection | Adjusting Mode | Actuator |
|---|---|---|---|---|---|---|---|
| JLK78-70 | 78 | 70 | 290 | 240 | Flange / Hammer unions | Cylinder | Manual |
| JLG65-35 | 65 | 35 | 260 | 200 | Flange | Fixed | N/A |
| JLG65-70 | 65 | 70 | 228 | 228 | Flange | Fixed | N/A |
| JLK52-35 | 52 | 35 | 206 / 210 | 154 / 176 | Hammer unions | Needle | Manual |
| JLK103-70 | 103 | 70 | 310 | 166 | Flange | Cylinder | Manual |
| JLKY103-70 | 103 | 70 | 310 | 166 | Flange | Cylinder | Hydraulic |
| JLKY78-105 | 78 | 105 | 292.1 | 262.6 | Flange | Cylinder | Hydraulic |
| JLK65-70 | 65 | 70 | 260 | 200 | Flange | Cylinder | Manual |
| JLKY65-70 | 65 | 70 | 260 | 200 | Flange | Cylinder | Hydraulic |
| JLK103-35 | 103 | 35 | 260 | 260 | Flange | Needle | Manual |
| JLK78-105 | 78 | 105 | 260 | 260 | Flange | Needle | Manual |
Data source: Technical data table.
This series covers sizes from 52 mm to 103 mm, with working pressures up to 140 MPa. The overall dimensions (A and B) vary based on the pressure rating, adjusting mode, and connection type. Fixed (G) models generally have a more compact structure, while Adjustable (K) models require additional space for the cylinder or needle adjustment mechanism.
The JL series regulates pressure by changing the flow area.
Replacing an older choke valve? Here is what to verify:
This series is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure which model fits your manifold? Explore popular models like JLK78-70 or JLG65-35. Tell us your working pressure and flow requirements, and our engineers will confirm the exact configuration.
HYRIG provides replacement parts for the JL series, including choke plugs, seats, stem packing kits, and hydraulic actuators. See our JL Choke Valve Parts page for compatible maintenance kits.
Q: What do the letters in the JL model code mean?
A: JL is Choke Valve. K is Adjustable (G is Fixed). Y means Hydraulic actuation. The numbers represent Nominal Diameter (mm) and Working Pressure (MPa).
Q: What is the maximum working pressure of this series?
A: The series supports working pressures up to 140 MPa, with specific models rated at 35, 70, and 105 MPa.
Q: What standards are these valves manufactured to?
A: They are manufactured to API 6A and API 16C standards.
For JL choke valve series selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.