HYRIG can supply the JL series choke valve range and its replacement parts. The JLK78-70 is a manual, adjustable choke valve with a 78 mm nominal bore, engineered to regulate flow and pressure in high-pressure wellhead and choke manifolds. It is manufactured to API 6A and API 16C standards and is available with either flange or hammer union connections.
| Model Number | Nominal Diameter | Pressure (MPa) | A (mm) | B (mm) | Connection Type | Adjusting Mode | Actuator |
|---|---|---|---|---|---|---|---|
| JLK78-70 (Variant 1) | 78 mm | 70 | 290 | 240 | Flange | Cylinder | Manual |
| JLK78-70 (Variant 2) | 78 mm | 70 | 290 | 240 | Hammer unions | Cylinder | Manual |
| JLK78-105 | 78 mm | 105 | 260 | 260 | Flange | Needle | Manual |
Data source: Technical data table.
Need a higher pressure rating? View the JLK78-105 Adjustable Choke Valve or explore the full JL Choke Valve Series.
Because this model is available with two different connection types, verify your pipeline interface before ordering:
Ensure adequate clearance for the cylinder adjustment mechanism and handwheel operation.
The JLK78-70 utilizes a cylinder adjusting mode to precisely control the flow area. By turning the handwheel, the internal plug moves relative to the seat, changing the orifice size. This allows operators to regulate flow and reduce downstream pressure, making it suitable for wellhead Christmas trees and choke manifolds.
The "K" in the model code indicates an adjustable design, allowing for dynamic flow control, as opposed to a "G" (fixed/positive) choke which has a fixed orifice size.
Looking for a replacement for your existing choke valve? Here’s what to check:
This valve is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure whether you need a cylinder or needle adjusting mode? Tell us your specific flow control requirements, and our engineers will match the correct JLK or JLG model for your manifold.
HYRIG provides replacement parts for the JLK series, including:
See our JL Choke Valve Parts page for compatible maintenance kits.
Q: What do the letters in JLK78-70 stand for?
A: JL stands for Choke Valve, K means Adjustable (G would be fixed), 78 is the nominal diameter in mm, and 70 is the working pressure in MPa.
Q: What is the working pressure of this model?
A: The JLK78-70 is rated for a working pressure of 70 MPa (10,000 psi).
Q: What standards does this valve meet?
A: It is manufactured according to API 6A and API 16C standards.
Q: Is this a hydraulic or manual valve?
A: This is a manual valve. Models with a "Y" suffix (like JLKY103-70) are hydraulically actuated.
Q: What is the difference between Variant 1 and Variant 2?
A: The only difference is the end connection. Variant 1 uses flanges, while Variant 2 uses hammer unions.
For JLK78-70 choke valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.