HYRIG can supply the JL series choke valve range and its replacement parts. The JLG65-35 is a fixed (positive) choke valve with a 65 mm nominal bore, engineered to provide a constant, predetermined pressure drop in wellhead and manifold applications. It is manufactured to API 6A and API 16C standards and features a flange connection.
| Model Number | Nominal Diameter | Pressure (MPa) | A (mm) | B (mm) | Connection Type | Adjusting Mode | Actuator |
|---|---|---|---|---|---|---|---|
| JLG65-35 | 65 mm | 35 | 260 | 200 | Flange | Fixed | N/A |
| JLG65-70 | 65 mm | 70 | 228 | 228 | Flange | Fixed | N/A |
Data source: Technical data table.
Need a higher pressure rating? View the JLG65-70 Fixed Choke Valve or explore the full JL Choke Valve Series.
The exact footprint for the JLG65-35 configuration is:
Because this is a fixed choke, there is no external adjustment mechanism or handwheel, allowing for a compact footprint. Verify your flange specifications before ordering.
The JLG65-35 utilizes a fixed choke (positive choke) design. It works by installing a fixed-size "bean" or restrictor plate into the flow path. This creates a constant pressure drop and flow rate.
The "G" in the model code indicates a fixed design. Unlike adjustable (K) models, it has no moving internal parts, making it highly durable for applications where a consistent flow restriction is required without the need for dynamic adjustment.
Looking for a replacement for your existing fixed choke valve? Here’s what to check:
This valve is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help determining the correct fixed bean size for your flow rate? Tell us your upstream pressure, desired downstream pressure, and flow rate, and our engineers will recommend the correct orifice size.
HYRIG provides replacement parts for the JLG series, including:
See our JL Choke Valve Parts page for compatible maintenance kits.
Q: What does the "G" stand for in JLG65-35?
A: The "G" stands for Fixed (or Positive) choke. This means the flow restriction is determined by a fixed-size bean inside the valve, not an adjustable mechanism.
Q: Does this valve have a handwheel?
A: No. Fixed choke valves do not have an adjustment mechanism or handwheel. The flow rate is controlled solely by the size of the bean installed.
Q: What is the working pressure of this model?
A: The JLG65-35 is rated for a working pressure of 35 MPa (5,000 psi).
Q: Can I change the bean size in the field?
A: Yes, the bonnet can typically be removed to replace the fixed bean with a different size if flow conditions change.
Q: What standards does this valve meet?
A: It is manufactured according to API 6A and API 16C standards.
For JLG65-35 fixed choke valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.