HYRIG can supply the JL series choke valve range and its replacement parts. The JLK65-70 is a manual, adjustable choke valve with a 65 mm nominal bore, engineered to regulate flow and pressure in high-pressure wellhead and choke manifolds. It features a cylinder adjusting mode and flange connections.
| Model Number | Nominal Diameter | Pressure (MPa) | A (mm) | B (mm) | Connection Type | Adjusting Mode | Actuator |
|---|---|---|---|---|---|---|---|
| JLK65-70 | 65 mm | 70 | 260 | 200 | Flange | Cylinder | Manual |
| JLKY65-70 | 65 mm | 70 | 260 | 200 | Flange | Cylinder | Hydraulic |
Data source: Technical data table.
Need hydraulic actuation? View the JLKY65-70 Hydraulic Choke Valve or explore the full JL Choke Valve Series.
The exact footprint for the JLK65-70 configuration is:
Ensure adequate clearance for the cylinder adjustment mechanism and handwheel operation.
The JLK65-70 utilizes a cylinder adjusting mode to control the flow area. By turning the handwheel, the internal plug moves relative to the seat. This provides reliable manual control for 10,000 psi systems.
The "K" in the model code indicates an adjustable design. If you require hydraulic actuation instead of a manual handwheel, choose the "Y" model (JLKY65-70).
Looking for a replacement for your existing choke valve? Here’s what to check:
This valve is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure whether you need manual or hydraulic actuation? Tell us your operational requirements, and our engineers will match the correct JLK (manual) or JLKY (hydraulic) model for your manifold.
HYRIG provides replacement parts for the JLK65 series, including:
See our JL Choke Valve Parts page for compatible maintenance kits.
Q: What is the working pressure of this model?
A: The JLK65-70 is rated for a working pressure of 70 MPa (10,000 psi).
Q: Is this valve hydraulic or manual?
A: This model (JLK65-70) is manual. The JLKY65-70 is the hydraulic version.
Q: What adjusting mode does this use?
A: It uses a cylinder adjusting mode for flow control.
Q: What standards does this valve meet?
A: It is manufactured according to API 6A and API 16C standards.
For JLK65-70 adjustable choke valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.