HYRIG can supply the JL series choke valve range and its replacement parts. The JLKY78-105 is a hydraulically actuated, adjustable choke valve with a 78 mm nominal bore, engineered for ultra-high-pressure flow regulation in automated wellhead and choke manifolds. It is manufactured to API 6A and API 16C standards.
| Model Number | Nominal Diameter | Pressure (MPa) | A (mm) | B (mm) | Connection Type | Adjusting Mode | Actuator |
|---|---|---|---|---|---|---|---|
| JLKY78-105 | 78 mm | 105 | 292.1 | 262.6 | Flange | Cylinder | Hydraulic |
| JLK78-105 | 78 mm | 105 | 260 | 260 | Flange | Needle | Manual |
Data source: Technical data table.
Need manual operation? View the JLK78-105 Manual Choke Valve or explore the full JL Choke Valve Series.
The exact footprint for the ultra-high-pressure JLKY78-105 configuration is:
Note the precise decimal dimensions (292.1 x 262.6 mm). This model is larger than the 70 MPa version to withstand 15,000 psi operating pressures.
The JLKY78-105 utilizes a hydraulic actuator to control the internal cylinder plug, allowing for remote and automated regulation of highly pressurized fluids. The body is heavily reinforced to handle 105 MPa (15,000 psi).
The "Y" in the model code indicates Hydraulic actuation. This is essential for safety and efficiency in ultra-high-pressure environments where manual operation is not practical.
Looking for a replacement for your existing 15,000 psi choke valve? Here’s what to check:
This valve is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if your system can handle 15,000 psi? Tell us your maximum anticipated wellhead pressure, and our engineers will confirm the correct pressure class and actuation method.
HYRIG provides replacement parts for the JLKY78 series, including:
See our JL Choke Valve Parts page for compatible maintenance kits.
Q: What is the maximum working pressure of this valve?
A: The JLKY78-105 is rated for an ultra-high working pressure of 105 MPa (15,000 psi).
Q: What does the "Y" stand for?
A: The "Y" indicates hydraulic actuation for remote control.
Q: What are the exact dimensions?
A: The overall dimensions are A: 292.1 mm and B: 262.6 mm.
Q: What standards does this valve meet?
A: It is manufactured according to API 6A and API 16C standards.
For JLKY78-105 hydraulic choke valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.