HYRIG can supply the JL series choke valve range and its replacement parts. The JLKY65-70 is a hydraulically actuated, adjustable choke valve with a 65 mm nominal bore, engineered to regulate flow and pressure in automated wellhead and choke manifolds. It features a cylinder adjusting mode and flange connections.
| Model Number | Nominal Diameter | Pressure (MPa) | A (mm) | B (mm) | Connection Type | Adjusting Mode | Actuator |
|---|---|---|---|---|---|---|---|
| JLK65-70 | 65 mm | 70 | 260 | 200 | Flange | Cylinder | Manual |
| JLKY65-70 | 65 mm | 70 | 260 | 200 | Flange | Cylinder | Hydraulic |
Data source: Technical data table.
Need manual operation? View the JLK65-70 Manual Choke Valve or explore the full JL Choke Valve Series.
The exact footprint for the JLKY65-70 configuration is:
The external dimensions are identical to the manual version (JLK65-70). Ensure adequate space for hydraulic actuator lines and fittings.
The JLKY65-70 utilizes a hydraulic actuator to control the internal cylinder plug. This allows for remote operation and automated pressure regulation, eliminating the need for an operator to physically turn a handwheel in hazardous or hard-to-reach locations.
The "Y" in the model code indicates Hydraulic actuation. It uses hydraulic pressure to move the stem, changing the orifice size to regulate flow.
Looking for a replacement for your existing hydraulic choke valve? Here’s what to check:
This valve is specifically suited for:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if your control system is compatible? Tell us your hydraulic supply pressure and connection specifications, and our engineers will match the correct JLKY model.
HYRIG provides replacement parts for the JLKY65 series, including:
See our JL Choke Valve Parts page for compatible maintenance kits.
Q: What is the working pressure of this model?
A: The JLKY65-70 is rated for a working pressure of 70 MPa (10,000 psi).
Q: Is this valve hydraulic or manual?
A: This model (JLKY65-70) is hydraulic. The JLK65-70 is the manual version.
Q: What does the "Y" stand for?
A: The "Y" indicates hydraulic actuation for remote control.
Q: What standards does this valve meet?
A: It is manufactured according to API 6A and API 16C standards.
For JLKY65-70 hydraulic choke valve selection and replacement parts, contact HYRIG: info@hyrig.com
Page last updated: 2026-11-08
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.