| Cone Sizes | 10-inch and 12-inch Desander |
| Flow Capacity | 400–500 GPM (10"), 500–600 GPM (12") |
| Separation Stage | Primary coarse sand removal |
| Body Material | High-durometer polyurethane; ceramic inserts optional |
| Compatible Host | Kemtron 1500HDX (10"), 1000 Pro (12") |
| Manifold Connection | Grooved-end (verify against Kemtron header) |
| Replacement Compatibility | Drop-in replacement for Kemtron HDD desander manifolds |
| Part Number Reference | Verify against drawing (10" and 12" cones) |
| Parameter | 10" Desander Cone | 12" Desander Cone |
|---|---|---|
| Reference Part No. | Verify against drawing | Verify against drawing |
| Cone diameter | 10 in (254 mm) | 12 in (305 mm) |
| Flow capacity | 400–500 GPM | 500–600 GPM |
| Application | Desander (coarse sand) | Desander (coarse sand) |
| Body material | Urethane; ceramic insert optional | Urethane; ceramic insert optional |
| Compatible host | Kemtron 1500HDX | Kemtron 1000 Pro |
| Manifold connection | Grooved-end | Grooved-end |
Data source: Technical data table.
| Dimension | 10" Cone | 12" Cone |
|---|---|---|
| Overall height | Matches Kemtron 10" header | Matches Kemtron 12" header |
| Cone body OD | 10 in (254 mm) | 12 in (305 mm) |
| Manifold interface | Grooved-end | Grooved-end |
| Weight (approx.) | 15–20 kg | 20–25 kg |
Drilling mud enters the desander cone tangentially under pressure. Centrifugal force drives denser sand particles toward the cone wall and down through the apex as underflow, while clarified fluid exits upward through the vortex finder. In HDD operations, the 12" or 10" desander cone is the primary sand-removal stage, protecting the downstream desilter cones and the downhole tool string from coarse solids.
Kemtron HDD systems typically use isolation valves on each desander cone, allowing individual cone shutdown for maintenance without interrupting the rest of the manifold. The cone bodies are made of high-durometer polyurethane; ceramic inserts are available for abrasive formations where standard urethane wears too quickly.
Replacing a Kemtron desander cone? Check these points before ordering:
Not interchangeable with: 4" or 5" desilter cones, or desander cones from non-Kemtron manifold patterns, without verifying inlet and outlet dimensions first.
For 4" and 5" desilter cones used after the desander stage, see Kemtron 4" & 5" desilter cone compatible replacement. For the full range, see Kemtron-compatible hydrocyclones.
Not sure whether your Kemtron system uses 10" or 12" desander cones, or whether a ceramic insert is worth the upgrade? Send us a photo of the cone body and the header connection, and we will confirm the matching configuration before you order.
HYRIG provides replacement parts for Kemtron 10" and 12" desander cones:
| Part Name | Reference Part No. | Notes |
|---|---|---|
| 10" Desander Cone | Verify against drawing | Complete assembly or wear sections |
| 12" Desander Cone | Verify against drawing | Complete assembly or wear sections |
| Apex | Verify against drawing | Underflow control |
Qty as per parts list; verify against original drawing. For wear-part inspection guidance, see Kemtron hydrocyclone wear parts.
Q1: Is this an original Kemtron product?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with, authorized by, or endorsed by Elgin Separation Solutions or Astec.
Q2: How do I know if I need a 10" or 12" desander cone?
A: Kemtron 1500HDX uses 10" desanders; 1000 Pro uses 12" desanders. Check your system model and manifold layout.
Q3: Do you offer ceramic inserts for desander cones?
A: Yes. Ceramic inserts are available for both 10" and 12" desander cones to extend wear life in abrasive formations.
Q4: What is the lead time for Kemtron desander cones?
A: Standard urethane cones ship in 2–3 weeks. Ceramic options may require 4–5 weeks. Plan ahead for project start dates.
Q5: What should I inspect if the desander cone cut point drifts?
A: Check the apex opening for erosion and the lower cone body for grooving. A worn apex is the most common cause of coarse underflow.
For Kemtron 10" / 12" desander cone selection and compatible replacement parts, contact HYRIG: info@hyrig.com
What to include for fastest quote:
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.