| Compatible Models | Kemtron KTH-4-00x (4" Desilter), 5" Desilter, 10" Desander, 12" Desander |
| Cone Sizes | 4-inch & 5-inch Desilter, 10-inch & 12-inch Desander |
| Flow Capacity | 75–85 GPM (5" Desilter), 400–600 GPM (12" Desander) |
| Separation Range | Fine silt (desilter), coarse sand (desander) |
| Body Material | High-durometer polyurethane; ceramic inserts available |
| Part Number System | KTH-4-001 to KTH-4-005 (4" cone components) |
| Compatible Host | Kemtron 400 Pro, 1000 Pro, 1500HDX HDD systems |
| Replacement Compatibility | Drop-in replacement for standard Kemtron HDD manifolds |
| Parameter | 4" Desilter Cone | 5" Desilter Cone | 10" Desander Cone | 12" Desander Cone |
|---|---|---|---|---|
| Reference Part No. | KTH-4-002 (Body) | Verify against drawing | Verify against drawing | Verify against drawing |
| Cone Diameter | 4 in (102 mm) | 5 in (127 mm) | 10 in (254 mm) | 12 in (305 mm) |
| Flow Capacity | 50–65 GPM | 75–85 GPM | 400–500 GPM | 500–600 GPM |
| Application Stage | Desilter | Desilter | Desander | Desander |
| Body Material | Urethane / Ceramic optional | Urethane / Ceramic optional | Urethane / Ceramic optional | Urethane / Ceramic optional |
| Compatible Host | HDD 400 Pro | HDD 1000 Pro / 1500HDX | HDD 1500HDX | HDD 1000 Pro |
Data source: Technical data table.
| Model | Overall Interface | Approx. Weight |
|---|---|---|
| 4" Desilter | 2" grooved-end (KTH-GL-203 elbow) | 4–6 kg |
| 5" Desilter | Matches Kemtron 5" manifold | Verify against drawing |
| 10" Desander | Matches Kemtron 10" header | 15–20 kg |
| 12" Desander | Matches Kemtron 12" header | 20–25 kg |
Hydrocyclone cones separate solids from drilling fluid using centrifugal force. Mud enters tangentially and spins inside the cone; heavier solids are pushed to the wall and exit through the apex as underflow, while cleaner fluid rises through the vortex finder. In HDD operations, the 12" or 10" desander cones remove coarse sand, while the 5" or 4" desilter cones polish the mud by removing fine silt. Kemtron HDD systems typically use isolation valves on each cone, allowing individual cone shutdown for maintenance without stopping the entire manifold.
The 4" Kemtron cone assembly is built around a modular KTH part number system: the inlet (KTH-4-001), body (KTH-4-002), apex nut (KTH-4-003), apex wear insert (KTH-4-004), and stainless steel clamp (KTH-4-005) are all replaceable individually. This modularity is critical for HDD contractors who need to keep wear-part costs low and minimize downtime between bores.
Replacing a worn Kemtron HDD cone? Check these points before ordering:
Not interchangeable with: Non-Kemtron manifold patterns or cones from other brands without verifying the inlet and outlet dimensions first.
Not sure whether your Kemtron system uses 4" or 5" desilters, or whether a ceramic insert is worth the upgrade for your HDD formation? Send us a photo of the cone body and the part number stamped on the KTH component, and we will confirm the matching configuration before you order.
HYRIG provides a full range of replacement parts for Kemtron-compatible hydrocyclone cones:
To browse individual wear parts and inspection guidelines, see our Kemtron hydrocyclone wear parts index.
Q1: Are these original Kemtron hydrocyclone cones?
A: No. HYRIG supplies independent, compatible replacement cones and is not affiliated with or endorsed by Elgin Separation Solutions or Astec.
Q2: How do I identify which Kemtron cone I need?
A: Check your HDD system model (400 Pro, 1000 Pro, 1500HDX) and the cone diameter. For 4" cones, match the KTH-4-00x part number.
Q3: Do you supply ceramic inserts for Kemtron cones?
A: Yes. Ceramic inserts are available for 4", 5", 10", and 12" cones to extend wear life in abrasive HDD formations.
Q4: What is the lead time for Kemtron-compatible cones?
A: Standard urethane cones ship in 2–3 weeks. Ceramic options may require 4–5 weeks. Plan ahead for project start dates.
Q5: Can I replace individual KTH components without buying a complete cone?
A: Yes. The KTH-4-001 to KTH-4-005 components are designed for individual replacement.
For Kemtron-compatible hydrocyclone cone selection and spare parts, contact HYRIG: info@hyrig.com
What to include for fastest quote:
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.