Lower IBOP 114706-500 for VARCO TDS-10SA – Technical Specifications

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Technical data for Lower IBOP 114706-500 on VARCO TDS-10SA top drive: 5,000 psi working, 7,500 psi test, 3-1/4" bore, 4130 steel, NBR seals. Operating torque vs differential pressure. API 7-1 & 16D.

Conatct For Details
DetailReview(0)Additional

Detailed Engineering Data

This page provides complete technical specifications for the Lower IBOP 114706-500 when used with the VARCO TDS-10SA top drive.

Pressure Ratings

ParameterValueUnit
Working Pressure5,000psi (34.5 MPa)
Shell Test Pressure7,500psi (51.7 MPa)
Seat Test Pressure (high)5,000psi (34.5 MPa)
Seat Test Pressure (low)500psi (3.4 MPa)

Dimensional Data

ParameterValue
Bore Diameter3-1/4" (82.6 mm)
Top Connection4-1/2" IF female (mates to upper IBOP or top drive)
Bottom Connection3-1/2" IF male (to saver sub or workover string)
Overall Length (end to end)17.8" (452 mm) typical
T-handle length12" (305 mm)

Materials

ComponentMaterialSpecification
Body & End Pieces4130 alloy steelHeat treated, normalized & tempered
BallChrome-plated alloy steelHRC 55-60, polished
SeatsThermoplastic + NBR energizerAPI 16D compliant
Stem SealsNBR O-ringsDurometer 90
T-handleCarbon steelZinc-plated

Temperature Limits

ConditionMinMax
Ambient / Fluid-20°C (-4°F)121°C (250°F)
Storage-40°C (-40°F)70°C (158°F)

Operating Torque vs. Differential Pressure

Differential Pressure (psi)Breakaway Torque (N·m)Running Torque (N·m)
03015
1,0008545
2,50014580
5,000225130

Values are approximate and may vary with seal condition and lubrication.

Installation Torque

ConnectionRecommended Torque
Lower IBOP to upper IBOP / top drive13,500 – 15,000 N·m (10,000 – 11,000 ft·lbs)
Lower IBOP to saver sub / workover stringPer manufacturer specification

API Compliance

  • API Spec 7-1 – Thread connections and interchangeability

  • API 16D – IBOP design, testing, and performance

  • API Q1 – Quality management system

Testing Requirements per API 16D

Test TypePressureHold TimeAcceptance Criteria
Low-pressure seat500 psi5 minNo visible leakage
High-pressure seat5,000 psi5 minNo pressure drop
Shell (body)7,500 psi5 minNo structural leakage
OperationalAtmospheric3 cyclesSmooth operation

Contact for Complete Technical Package

For 2D/3D CAD drawings, material test reports (MTR), or API 16D test certificates:
Email: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit