The Lower IBOP 114706-500 is manufactured to NOV Varco specifications for the VARCO TDS-10SA top drive system. The TDS-10SA is a compact, lightweight top drive used on workover rigs, completion operations, and light drilling. Adding a lower IBOP provides dual barrier protection, which is recommended for workover jobs where pulling pipe under pressure is common.
Direct fit for VARCO TDS-10SA (mounts below upper IBOP)
Working pressure: 5,000 psi (34.5 MPa)
Full bore: 3-1/4" (82.6 mm)
Material: 4130 alloy steel forging
Seals: NBR (nitrile rubber) for standard service
Connections: API IF thread (compatible with TDS-10SA assembly)
Operation: Manual T-handle (clockwise close)
API compliance: API Spec 7-1, API 16D
Redundant barrier – if upper IBOP leaks, lower IBOP provides backup
Workover safety – pulling pipe under pressure requires dual barriers
Pressure equalization – allows safe equalization before opening upper IBOP
Full bore – no restriction for wireline or coiled tubing
| Position | Part Number | Primary Role |
|---|---|---|
| Upper IBOP | 110103-500 | Primary barrier, closes before breaking connection |
| Lower IBOP | 114706-500 | Secondary barrier, backup for well control |
Workover rigs and snubbing units
Completion and intervention operations
Light drilling (≤ 2,500 m)
Non-sour environments (standard NBR version)
For pricing, availability, and technical datasheets:
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.