A pipeline booster pump maintains or increases pressure along liquid pipelines (crude oil, refined products, NGL, water, etc.) to overcome friction losses and elevation changes. Booster stations are spaced every 50-150 km, requiring pumps that operate continuously at high efficiency, high pressure, and often with variable flow. Our API 610 BB2 and BB3 multistage pumps are specifically engineered for these demanding pipeline duties. Both designs fully comply with API 610 11th/12th edition (ISO 13709) .
API 610 BB2 – Axially Split Multistage Booster Pump
Structure match check: API 610 BB2 is defined as a horizontal, axially split, multistage, between‑bearings pump. This is suitable for pipeline booster duties up to moderate pressures (typically up to 100‑150 bar).
Why BB2 for pipeline booster?
Axially split casing allows removal of the top half for internal inspection and maintenance without disturbing piping – important for high‑availability pipeline service.
Multistage design (2‑10 stages) provides heads from 200 to over 1000 m.
Between‑bearings rotor ensures stability at high speeds and moderate pressures.
High efficiency (up to 86‑88%).
Good accessibility to impellers, diffusers, and wear rings.
Typical applications: crude oil, diesel, gasoline, NGL pipelines with discharge pressure up to 150 bar.
API 610 BB3 – Radially Split (Barrel) Multistage Booster Pump
Structure match check: API 610 BB3 is defined as a horizontal, radially split, multistage, between‑bearings barrel pump. This is required for very high pressure pipeline service (up to 300 bar or more), where the barrel casing safely contains high pressure and dynamic pressure transients.
Why BB3 for pipeline booster?
Barrel casing (radially split) provides superior pressure containment – no flanged joints exposed to high pressure, only end cover.
Suitable for discharge pressures up to 300 bar (4500 psi) or higher.
Compact design with high power density.
Excellent for products with high vapour pressure (LPG, NGL, light hydrocarbons) where leakage is critical – barrel pump contains internal pressure safely.
Typically has tighter internal clearances, slightly higher efficiency at high head.
Slightly more complex maintenance (requires pulling internal cartridge) but still can be done without removing piping.
Typical applications: high‑pressure crude or product pipelines, CO₂ pipelines, LPG / NGL trunk lines.
Comparison & Selection Guide
| Feature | BB2 (Axially Split) | BB3 (Barrel – Radially Split) |
|---|---|---|
| API 610 type | BB2 – axially split, multistage | BB3 – radially split, barrel, multistage |
| Max discharge pressure | Up to 150 bar (typically) | Up to 300 bar+ |
| Casing access | Remove top half – full internal access | Remove end cover – withdraw cartridge |
| Maintenance without pipe removal | Yes | Yes (cartridge withdrawn axially) |
| Efficiency | 85‑88% | 86‑89% (slightly higher at high pressure) |
| Cost | Moderate | Higher (due to barrel forging) |
| Best for | Medium pressure pipelines (crude, products) | High pressure pipelines (LPG, NGL, CO₂, high‑pressure crude) |
Key design features for pipeline booster service (both types)
High pressure capability – BB2: double casing not required, heavy wall axial halves. BB3: forged or cast barrel with end cover.
Materials – Casing: carbon steel (WCB, LCC for low temp, WC6 for higher temp) for crude/products. For corrosive services (sour crude, CO₂): austenitic or duplex stainless steel. Impellers: 12% chrome (CA6NM) or stainless.
Impeller arrangement – Opposed or same‑direction. Opposed impellers balance axial thrust, eliminating balance drum (common in BB3 high pressure). For BB2, balance drum with external return line.
Bearings – Between‑bearings: tilting pad journal bearings for high speeds; heavy duty thrust bearing (Kingsbury). Pure oil mist lubrication standard.
Sealing – API 682 cartridge mechanical seals. For volatile or hazardous liquids (LPG, NGL, light crude): double seals with Plan 53A (pressurized barrier) or Plan 54. For less volatile: tandem seals with Plan 52. Seal face materials: SiC vs. SiC or SiC vs. carbon.
NPSH – First stage impeller often double‑suction or with inducer to minimise NPSHr for pipeline suction conditions.
Variable speed – Both types well‑suited to VFD or variable speed gearboxes to match pipeline flow variations.
Rotor dynamic analysis – Per API 610, critical speeds and stability analysis provided, especially for high speed BB3.
Typical performance range
| Parameter | BB2 | BB3 |
|---|---|---|
| Flow rate | 50 – 3000 m³/h | 50 – 2500 m³/h |
| Head | 200 – 1200 m | 300 – 2000 m |
| Discharge pressure | Up to 150 bar | Up to 300 bar |
| Temperature | -40°C to +150°C | -40°C to +200°C |
| Speeds | 1500 – 6000 rpm | 1500 – 7000 rpm |
| Stages | 2 – 10 | 3 – 12 |
Typical applications
Crude oil trunk line booster stations – BB2 for medium pressure; BB3 for high pressure/long distance.
Refined product pipelines (gasoline, diesel, jet fuel) – BB2 standard.
NGL (natural gas liquids) and LPG pipelines – BB3 for high vapour pressure and high pressure.
CO₂ pipelines for enhanced oil recovery – BB3 (corrosion resistant materials).
Long distance water pipelines – BB2 (cost effective).
Ethylene and propylene pipelines – BB3 (high pressure, low temperature steel).
Why choose our API 610 pipeline booster pumps?
Full API 610 compliance – BB2 or BB3 types verified. Performance test, NPSH test, 4‑hour mechanical run test.
High efficiency – CFD optimised stage hydraulics reduce energy consumption over 8,000+ operating hours per year.
High reliability – Heavy duty bearings, robust shaft design, and conservative speed selection.
Easy maintenance – BB2: top‑half removal; BB3: cartridge pull‑out. Both keep piping undisturbed.
Short lead time – Standard BB2 sizes available 24‑28 weeks; BB3 barrel pumps 30‑36 weeks.
Global spare parts support – Stage pieces, impellers, shafts, bearings, seal cartridges, barrel casings shipped worldwide.
Quality assurance
ISO 9001:2015 certified.
API 610 mechanical run test with vibration and bearing temperature monitoring.
Hydrostatic test of casing (BB2) or barrel (BB3) at 1.5× working pressure.
Material traceability EN 10204 3.1 / 3.2.
NDE – MT, PT, UT, RT as required.
Rotor dynamic analysis report (lateral and torsional) per API 610.
How to specify your pipeline booster pump
Please provide: flow (m³/h), head (m), operating temperature (°C), liquid type (crude, product, NGL, water, CO₂, etc.), suction pressure (bar), discharge pressure required (bar), NPSHa (m), pipeline diameter and length (if known), required material (carbon steel / low temp / stainless / duplex), and any emissions regulations. We will recommend BB2 or BB3 type, number of stages, impeller arrangement, seal plan, bearing type, and driver (motor or turbine) with VFD.
Contact us
For a quotation or technical discussion on pipeline booster pumps (API 610 BB2 / BB3) :
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.