Submersible Cryogenic In-tank Pumps | API 610 VS6 | Propane, LPG & Butane

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Fully submerged API 610 VS6 pump for propane, LPG and butane. Eliminates shaft seals → zero external leakage. Motor cooled by pumped liquid. Top-pull design allows maintenance without tank degassing. Flow up to 800 m³/h, head up to 600 m.

Conatct For Details
DetailReview(0)Additional

Designed for safe, leak‑free handling of liquefied petroleum gases, this API 610 VS6 vertical submerged pump is installed directly inside pressurized storage vessels – including bullet tanks, mounded tanks, and sphere tanks. The entire pump and motor assembly is immersed in the propane / LPG / butane liquid, eliminating mechanical shaft seals – the most common source of leakage in hydrocarbon service.

Why choose this pump for LPG, Propane or Butane?

  • Zero leakage, zero emissions – No dynamic seals, no gland packing, no fugitive VOCs. Meets strict environmental regulations (LDAR, EPA, EU Seveso).

  • Intrinsically safe submerged motor – Runs inside oxygen‑free LPG. No explosion risk, no external purging. ATEX / IECEx ready.

  • Easy maintenance without tank emptying – Whole pump withdraws through top nozzle while tank remains pressurized. Downtime reduced >70%.

  • Excellent NPSH performance – First-stage inducer prevents cavitation and vapour lock, especially on high‑vapour‑pressure propane.

  • High efficiency – PMSM motor gives overall efficiency >78%, saving energy and reducing BOG.

  • Wide operation range – Handles pure propane, commercial LPG (C3/C4 blends), high‑butane mixtures. Temperature: -45°C to +50°C, pressure up to 2.5 MPa (25 bar).

Technical summary (typical)

ParameterValue
Flow rate5 – 800 m³/h
Head20 – 600 m
Temperature-45°C to +50°C
Max pressure2.5 MPa (up to 4.0 MPa on request)
MotorPMSM (standard) or induction
MaterialsDuctile iron / carbon steel / SS316. NACE MR0175 optional
StandardsAPI 610 12th ed., ISO 13709, ATEX, PED

Main applications

  • Propane / LPG / butane terminals – storage, transfer, truck & railcar loading/unloading.

  • LPG bullet tanks (above ground and mounded).

  • Refinery LPG and propylene service.

  • Peak‑shaving plants – transfer to vaporisers.

  • Cylinder filling plants and bobtail truck loading.

How it works

The pump is suspended from a top flange bolted to the tank nozzle. The multi‑stage diffuser casing and submerged PMSM motor hang inside the tank, fully wetted by LPG. Pumped liquid flows through the motor to cool windings and bearings, then enters the inducer and impellers. No external piping, no shaft penetration through the tank wall – only electrical cables pass through a sealed terminal block.

Reliability and safety

Bearings are carbon‑graphite or ceramic‑lined to tolerate brief dry‑running. Axial thrust is balanced by a double balance drum for long bearing life. Optional integrated check valve prevents reverse rotation.

Service and support

We provide full technical documentation, 3D models, and commissioning assistance. Spare parts (inducer, impellers, bearings, motor stator) available from stock.

Contact us

For a quotation or to discuss your specific LPG/propane/butane pumping requirements:

info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit