VS7 Pump – API 610 Vertical Can‑Type Submersible Motor Pump for Volatile Low NPSH Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
VS7 pump is an API 610 vertical can-type pump with submersible motor inside a pressure‑tight can barrel. Motor and pump fully submerged in the pumped liquid inside the can – no external shaft seal, zero leakage. Excellent ultra‑low NPSH performance eliminates cavitation for volatile media like LPG, light hydrocarbons, condensate. Designed for refinery, petrochemical, gas plant, chemical industry. Key features: sealed can construction, no external seal, explosion‑proof motor inside can, ultra‑low NPSH, compact cartridge pull‑out design. Applications: LPG & light hydrocarbon pumping, volatile process medium transfer, refinery low NPSH service, gas plant condensate pumping, petrochemical sealed process system, high‑pressure can‑type pressurization. Get free VS7 datasheet, performance curve, CAD drawing, factory quotation.

Conatct For Details
DetailReview(0)Additional

The VS7 pump is an API 610 vertical can‑type centrifugal pump with a submersible motor installed inside a pressure‑tight can barrel. The entire motor and pump assembly is fully submerged within the pumped liquid inside the can, eliminating the need for any external shaft seal. This sealed construction provides zero leakage, ultra‑low NPSH performance, and safe handling of volatile, flammable, or hazardous liquids. The VS7 is widely used in refineries, petrochemical plants, gas plants, and chemical facilities for LPG, light hydrocarbons, condensate, and other low‑NPSH volatile media.

Key Design Features

  • API 610 VS7 Vertical Can‑Type Submersible Motor Pump – Fully compliant with API 610 (latest edition). The pump and motor are integrated inside a sealed, pressure‑tight can barrel.

  • Motor Integrated Inside Pressure Can, Fully Sealed Structure – No external shaft seal. The motor is cooled and lubricated by the pumped liquid (or a clean barrier fluid). This eliminates seal leakage – the #1 failure mode for volatile liquid pumps.

  • Excellent Ultra‑Low NPSH Performance, No Cavitation for Volatile Media – The pump is fully submerged inside the can, which is flooded from the suction vessel. The static liquid head provides positive suction pressure, allowing operation with available NPSH as low as 0.5 meters. Ideal for boiling point liquids like LPG, propane, butane, and light condensate.

  • No External Shaft Seal, Zero Leakage Risk – With no dynamic seal penetrating the can wall, there is no path for product leakage to atmosphere. This is critical for flammable, toxic, or environmentally hazardous fluids.

  • Compact Cartridge Design, Easy Pull‑Out Maintenance – The entire motor‑pump cartridge can be removed from the can as a single assembly without unbolting the can from the piping. Maintenance is performed at grade.

  • Suitable for High Pressure, High Temperature and Volatile Flammable Liquid – Can barrel rated for process pressure. Materials available for high temperature and corrosive service.

  • Explosion‑Proof Design Standard for Petrochemical Hazardous Area – Motors are explosion‑proof (Ex d) certified for Class I, Division 1 or Zone 1 hazardous areas.

Typical Performance Range

  • Flow: up to 500 m³/h (2,200 GPM) – depending on can size

  • Head: up to 600 m (1,970 ft) – multistage

  • Pressure: up to 100 bar (1,450 psi) – can rating

  • Temperature: -40°C to +200°C (-40°F to +392°F)

  • Speed: 1,480 / 2,980 rpm (50/60 Hz)

Material Options

  • Can barrel: Carbon steel, alloy steel, 316L, duplex

  • Impeller & diffuser: 316L, duplex, high‑chrome

  • Motor housing: Cast iron, steel (explosion‑proof)

  • Internal bearings: Product‑lubricated carbon/ceramic

Main Applications

  • LPG & light hydrocarbon pumping – Propane, butane, ethane, NGL from storage spheres or bullets.

  • Volatile process medium transfer – Low NPSH chemicals near boiling point.

  • Refinery low NPSH service – Pumping from low‑level collection drums or vessels under low suction head.

  • Gas plant condensate pumping – Removing natural gas liquids from separators and scrubbers.

  • Petrochemical sealed process system – Handling ethylene, propylene, and other monomers in pressurized loops.

  • High‑pressure can‑type pressurization – Boosting volatile liquids without seal leakage.

Why Choose Our VS7 Pump?

  • Zero leakage – No shaft seal means no emissions, no product loss, no fire hazard.

  • Lowest NPSH – Can handle boiling point liquids with submergence as low as 0.5 m.

  • Compact footprint – Vertical can installation saves floor space.

  • Maintenance‑friendly – Pull cartridge, repair at shop, reinstall.

  • API 610 reliability – Designed for critical volatile service.

Get Your VS7 Pump Technical Package

We provide free:

  • VS7 datasheet (API 610 format)

  • Performance curve (head, efficiency, NPSHr)

  • CAD drawing (2D can installation, PDF/DWG)

  • 3D model (STEP/IGES)

  • Factory direct quotation (EXW / FOB / CIF)

How to Request?

Send us your operating conditions:

  • Flow rate (m³/h or GPM)

  • Total head (m or ft)

  • Fluid (LPG, propane, butane, condensate, etc.) and temperature (°C)

  • Available NPSH (or specify "low NPSH")

  • Pressure rating and can length requirement

Our engineering team will reply within 24 hours with the recommended VS7 pump model, performance curve, CAD drawing, and factory price.

Email: info@hyrig.com

We are a professional API 610 pump manufacturer (OH1–OH6, BB1–BB5, VS1–VS7 types) serving global refineries, petrochemical plants, gas plants, and chemical facilities. Contact us for custom‑engineered VS7 vertical can‑type submersible motor pumps for volatile low NPSH service at factory direct wholesale pricing.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit