VS7 Pump Technical Specifications – API 610 Vertical Can‑Type Submersible Motor Pump for Volatile Low NPSH Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
VS7 pump API 610 vertical can-type submersible motor pump technical specifications. Performance: flow 2–800 m³/h, head 30–1200 m, speed 1480/2980 rpm, temperature -50°C to 320°C, max pressure 140 bar, ultra low NPSH can-type design. Structure: vertical can-type submersible motor (VS7), pump + motor integrated inside pressure can, full pressure-containing sealed can barrel, single-stage or multistage impeller, submersible explosion-proof motor inside can, medium-lubricated internal bearings, cartridge pull-out type maintenance (no pipe disconnection). Materials: carbon/alloy steel, 316L can & casing; 316L/duplex/super duplex impeller; high strength alloy shaft; anti-corrosion internal parts. Documents: API data sheet, can installation drawing, performance curve, 3D model, material certificate.

Conatct For Details
DetailReview(0)Additional

This page provides complete technical parameters for our VS7 API 610 vertical can‑type pump with a submersible motor installed inside a pressure‑tight can barrel. The VS7 is specifically designed for handling volatile, flammable, or hazardous liquids such as LPG, propane, butane, light hydrocarbons, and condensate. Because the entire motor and pump assembly is submerged inside the sealed can, there is no external shaft seal – zero leakage and ultra‑low NPSH performance.


Performance Range

ParameterValue
Flow rate2 ~ 800 m³/h (9 ~ 3,520 GPM)
Total head30 ~ 1,200 m (98 ~ 3,940 ft) – single‑stage or multistage
Speed1,480 / 2,980 rpm (50/60 Hz)
Medium temperature-50°C ~ +320°C (-58°F ~ +608°F) – higher with special materials
Maximum working pressureUp to 140 bar (2,030 psi)
NPSHrUltra low NPSH can‑type hydraulic design – operates with <1 m available NPSH

Structural & Mechanical Design

  • Type: Vertical can‑type submersible motor pump (API 610 VS7 designation)

  • Structure: Pump + motor integrated inside pressure can – no external shaft penetration

  • Can barrel: Full pressure‑containing sealed design – contains process pressure, no leakage

  • Impeller: Single‑stage (moderate head) or multistage (high head) – optional based on duty

  • Motor: Submersible explosion‑proof motor (Ex d), installed inside the can, cooled and lubricated by the pumped liquid (or clean barrier fluid)

  • Bearings: Medium‑lubricated internal bearings – product or barrier fluid lubricated, no external oil system

  • Maintenance: Cartridge pull‑out type – entire motor‑pump cartridge removes vertically without disconnecting can from piping


Material Options

ComponentStandard MaterialsUpgrade Options
Can & casingCarbon steel, alloy steel, 316LDuplex, super duplex
Impeller & diffuser316L stainless steelDuplex, super duplex, high chrome alloy
ShaftHigh strength alloy steel316L, duplex, K500
Internal partsAnti‑corrosion & anti‑abrasion alloyColmonoy‑coated, Stellite

Key Design Features Explained

No External Shaft Seal – Zero Leakage
The motor and pump are fully enclosed inside the sealed can. There is no dynamic seal where a shaft passes through the pressure boundary. This eliminates the primary leak path for volatile, flammable, or toxic liquids. Zero emissions, zero product loss, zero fire hazard.

Ultra Low NPSH
The can is flooded from the suction vessel, keeping the pump fully submerged. The static liquid head provides positive suction pressure, allowing the VS7 to operate reliably with available NPSH as low as 0.5 meters. This is critical for boiling point liquids (LPG, propane, condensate) where conventional pumps cavitate.

Submersible Explosion‑Proof Motor
The motor is specially designed for operation inside the pressurized can. It is explosion‑proof (Ex d) certified for hazardous areas (Class I, Division 1 or Zone 1). Cooling is provided by the surrounding fluid.

Cartridge Pull‑Out Maintenance
The entire rotating assembly (motor, shaft, impellers, bearings) is a single cartridge. To service, the can cover is removed and the cartridge is lifted out vertically. The can body and piping remain in place – no pipe disconnection required.

Can Barrel Pressure Containment
The can is a full pressure vessel, rated for process pressure up to 140 bar. Flanged connections allow integration into process piping.


Typical Applications

  • LPG and light hydrocarbon pumping (propane, butane, ethane, NGL)

  • Volatile process medium transfer (petrochemical monomers, refrigerants)

  • Refinery low NPSH service (boiling point liquids from low‑level vessels)

  • Gas plant condensate pumping (natural gas liquids from separators)

  • Petrochemical sealed process system (pressurized loops, hazardous fluids)

  • High‑pressure can‑type pressurization


Available Technical Documents (Free Request)

  • API 610 data sheet (filled with your operating conditions)

  • Can installation drawing (2D CAD, PDF/DWG) – shows can dimensions, flange details, cartridge removal clearance

  • Performance curve (head, efficiency, NPSHr vs flow)

  • 3D model (STEP/IGES for plant layout)

  • Material certificate (EN 10204 3.1 or 3.2)

  • Motor certificate (explosion‑proof certification)


Get Your VS7 Pump Technical Specification Package

To request a complete documentation package with a formal quotation, please send us your operating conditions:

  • Flow rate (m³/h or GPM)

  • Total head (m or ft)

  • Fluid (LPG, propane, butane, condensate, etc.) and temperature (°C)

  • Available NPSH (m or ft) – or specify “low NPSH”

  • Maximum working pressure (bar or psi)

  • Any special requirement (material, can length, motor type, ATEX, etc.)

Our engineering team will respond within 24 hours with:

  • Recommended VS7 pump model (single‑stage or multistage, can size, material)

  • Performance curve PDF

  • API 610 data sheet

  • Can installation drawing (2D CAD) and 3D model link

  • Motor and bearing recommendations

  • Factory direct price (EXW / FOB / CIF)

Email: info@hyrig.com

We are a professional API 610 pump manufacturer (OH1–OH6, BB1–BB5, VS1–VS7 types) serving global refineries, petrochemical plants, gas plants, and chemical facilities. Contact us for custom‑engineered VS7 vertical can‑type submersible motor pumps for volatile low NPSH service at factory direct wholesale pricing.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit