VS7 Pump Applications – API 610 Vertical Can‑Type Submersible Motor Pump for Volatile Low NPSH & Zero Leakage Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
VS7 pump serves volatile, low NPSH, zero leakage applications. Oil refinery: LPG pumping, naphtha & light hydrocarbon transfer, volatile medium low NPSH process, sealed pressurization. Petrochemical & gas plant: ethylene, propylene & condensate pumping, volatile solvent sealed delivery, gas plant process boosting. Chemical industry: low boiling point medium transfer, easily vaporized liquid pumping, closed sealed process system. Oil & gas terminal: LPG storage tank pumping, volatile medium tank top installation, zero leakage transfer. High‑pressure process: high‑pressure sealed can‑type pumping, flammable hazardous medium low NPSH application. Submersible motor inside sealed can – no external shaft seal, zero leakage. Ultra‑low NPSH handles liquids near boiling point. Explosion‑proof motor standard. Custom can pressure rating, stage number, and explosion‑proof grade for special process conditions.

Conatct For Details
DetailReview(0)Additional

The VS7 pump is an API 610 vertical can‑type pump with a submersible motor fully enclosed inside a pressure‑tight can barrel. Because there is no external shaft seal, the VS7 provides absolute zero leakage – a critical requirement for volatile, flammable, or hazardous liquids. Its flooded can design delivers ultra‑low NPSH performance, allowing operation with liquids near their boiling point (LPG, propane, ethylene, condensate) without cavitation. Below are the primary application scenarios.


1. Oil Refinery

  • LPG pumping – Transferring propane, butane, and LPG mixtures from storage spheres or bullets to process units.

  • Naphtha and light hydrocarbon transfer – Pumping low‑boiling point naphtha fractions and light ends with minimal NPSH.

  • Volatile medium low NPSH process – Handling reflux streams, off‑gases, and light hydrocarbon loops where available NPSH is <2 meters.

  • Sealed pressurization service – Boosting pressure of volatile streams without risk of seal leakage.

Why VS7 for refinery: Zero seal leakage eliminates fire hazard. Ultra‑low NPSH handles boiling point hydrocarbons. Explosion‑proof motor inside can.


2. Petrochemical & Gas Plant

  • Ethylene, propylene and condensate pumping – Moving light olefins and natural gas liquids from low‑pressure separators or scrubbers.

  • Volatile solvent sealed delivery – Pumping low‑boiling solvents (e.g., pentane, hexane, cyclohexane) with no emissions.

  • Gas plant process boosting – Increasing pressure of condensate streams before fractionation.

Why VS7 for petrochemical/gas: Can‑type design handles high pressure. Zero leakage protects environment. Reliable operation with low NPSH from gas plant vessels.


3. Chemical Industry

  • Low boiling point medium transfer – Pumping refrigerants (R‑134a, ammonia), methyl chloride, or other volatile chemicals.

  • Easily vaporized liquid pumping – Handling liquids with vapor pressure near atmospheric at operating temperature.

  • Closed sealed process system – Interconnecting reactor loops and storage where any leakage is unacceptable.

Why VS7 for chemical: Alloy materials (316L, duplex) for corrosive volatile media. No external seal means no fugitive emissions. Compact vertical can installation.


4. Oil & Gas Terminal

  • LPG storage tank pumping – Transferring LPG from bulk storage tanks to loading racks or transport trucks.

  • Volatile medium tank top installation – Pump mounted directly on tank nozzle (can penetrates tank), no suction piping.

  • Zero leakage transfer system – Critical for terminals with strict environmental regulations (VOC emissions control).

Why VS7 for terminals: Eliminates seal leakage – no product loss, no vapor release. Meets EPA/API 622 and other zero‑emission standards. Simple tank‑top mounting.


5. High‑Pressure Process

  • High‑pressure sealed can‑type pumping – Boosting pressure of volatile liquids up to 140 bar within a fully sealed can.

  • Flammable hazardous medium low NPSH application – Pumping from low‑pressure drums or vessels where NPSH is limited and zero leakage is mandatory.

Why VS7 for high‑pressure: Can barrel rated for process pressure. No dynamic seal means no pressure‑limiting seal faces. Safe for hydrogen‑rich or high‑vapor‑pressure services.


Custom Solutions for Special Process Conditions

  • Custom can pressure rating – Up to 140 bar (2,030 psi) or higher.

  • Custom stage number – Single‑stage for moderate head, multistage for high head (up to 1,200 m).

  • Explosion‑proof grade – Ex d IIB or IIC, ATEX/IECEx certified for Zone 1/Zone 2 hazardous areas.

  • Material upgrades – Carbon steel, 316L, duplex, super duplex, alloy steel.

  • Can length – Customized to tank nozzle or sump depth.

  • Barrier fluid system – For motor cooling when handling non‑conductive or very low viscosity fluids.


Get an Application‑Specific VS7 Pump Recommendation

To help you select the right VS7 pump for your volatile, low NPSH, or zero‑leakage application, please send us:

  • Application name (e.g., “LPG transfer” or “ethylene pumping”)

  • Flow rate (m³/h or GPM)

  • Total head (m or ft)

  • Fluid name, vapor pressure, and temperature (°C)

  • Available NPSH (m or ft) – or specify “low NPSH”

  • Maximum working pressure (bar or psi)

  • Any special requirement (can length, material, explosion‑proof rating, ATEX, etc.)

Our engineering team will respond within 24 hours with:

  • Recommended VS7 pump model (single‑stage or multistage, can size, material)

  • Performance curve with duty point (including NPSHr)

  • API 610 data sheet

  • Can installation drawing (2D CAD) and 3D model

  • Motor and bearing recommendations

  • Factory direct price (EXW / FOB / CIF)

Email: info@hyrig.com

We are a professional API 610 pump manufacturer (OH1–OH6, BB1–BB5, VS1–VS7 types) serving global refineries, petrochemical plants, gas plants, chemical facilities, and oil & gas terminals. Contact us for custom‑engineered VS7 vertical can‑type submersible motor pumps – the zero‑leakage, ultra‑low NPSH solution for volatile and flammable liquids – at factory direct wholesale pricing.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit