The Teda XQ114/9 is an open‑type hydraulic power tong designed for making and breaking tubing connections in oilfield well servicing and workover operations. The “114” indicates a maximum gripping diameter of 114 mm (4.5 inches) , while the “9” represents its maximum torque rating of 9 kN·m (about 80,000 in·lb) , positioning it as a medium‑to‑high torque tubing tong suitable for a wide range of production and workover applications.
This power tong is driven by a low‑speed, high‑torque hydraulic motor directly coupled with a manual directional valve, ensuring a compact, reliable, and easy‑to‑maintain assembly. The unit is supplied as a combination of a main tong and a hydraulic back‑up tong. By operating the directional valve on the main tong, the back‑up tong automatically clamps and releases the tubing coupling in perfect synchronization – eliminating the need for a separate control lever.
Both the main tong and the back‑up tong feature an inner‑curve cam roller climbing mechanism for bi‑directional gripping. To reverse the rotation direction, the operator simply turns the direction knob on both tongs. Interchangeable snap‑in dies allow the same tong to handle tubing sizes from 2‑3/8″ up to 4‑1/2″ , and optional dies can extend the range to 5″ casing.
The XQ114/9 offers two mechanical speed ranges: low gear delivers the full 9 kN·m torque for initial breakout or final make‑up, while high gear enables fast spinning to run tubing in or out quickly. This two‑speed design significantly reduces cycle time and improves overall workover efficiency.
Key features include:
Compact and lightweight design – easy to handle on workover rigs
Automatic hydraulic back‑up tong – no separate foot valve or lever
Bi‑directional gripping – quick direction change via knob
Tool‑less die change – snap‑in dies for different pipe sizes
Two‑speed transmission – optimum balance of torque and speed
Rugged construction – suitable for onshore and offshore environments
In summary, the Teda XQ114/9 hydraulic tubing tong combines 9 kN·m torque capacity, automatic back‑up tong operation, bi‑directional gripping, and two‑speed performance into a compact, field‑proven tool. It is ideal for workover rigs, rod pumping units, and well servicing operations handling tubing up to 4‑1/2″ where reliability and efficiency are required.
Hyrig supplies all Teda tongs and genuine spares. For inquiries, pricing, or technical support, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.