Teda XQ140/20 Hydraulic Tubing / Casing Tong – Overview

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The Teda XQ140/20 is an ultra‑high‑torque open‑type hydraulic power tong designed for making and breaking large‑diameter tubing and casing connections up to 140 mm (5.5″) in deep well workover, drilling, and heavy oilfield servicing, delivering a maximum torque of 20 kN·m. It is driven by a low‑speed high‑torque hydraulic motor with a direct‑mount manual directional valve, ensuring a compact yet rugged assembly. The integrated hydraulic back‑up tong automatically clamps and releases in sync with the main tong. Both tongs feature an inner‑curve cam roller bi‑directional gripping mechanism – simply turn the direction knob to reverse. The optimized multiple‑jaw design provides superior grip uniformity, minimizing pipe marking and damage. Interchangeable snap‑in dies accommodate pipe sizes from 3‑1/2″ to 5‑1/2″. Two‑speed transmission: low gear for the full 20 kN·m torque breakout/make‑up, high gear for faster spinning. This robust tool delivers unmatched performance for ultra‑deep wells
Conatct For Details
DetailReview(0)Additional

The Teda XQ140/20 is an ultra‑high‑torque, open‑type hydraulic power tong engineered for the most demanding making and breaking operations of large‑diameter tubing and casing connections in deep well workover, drilling, and heavy oilfield servicing. The “140” designation indicates a maximum gripping diameter of 140 mm (5.5 inches), while the “20” represents its exceptional torque capacity of up to 20 kN·m, placing it in the highest power category for hydraulic tongs.

This power tong is driven by a high‑efficiency, low‑speed high‑torque hydraulic motor directly coupled with a heavy‑duty manual directional valve, resulting in a robust, compact, and field‑reliable assembly. The tool is supplied as a combined unit consisting of a main tong and a hydraulic back‑up tong. By operating the directional valve on the main tong, the back‑up tong automatically clamps and releases the pipe coupling in perfect synchronization – eliminating separate controls, reducing operator fatigue, and enhancing safety.

Both the main tong and the back‑up tong utilize an advanced inner‑curve cam roller climbing mechanism for bi‑directional gripping. To reverse the rotation direction, the operator simply turns the direction knob on both tongs. The multiple‑jaw design (optimized for 20 kN·m torque) provides superior grip distribution, significantly reducing stress concentrations and minimizing marking or damage on large‑diameter tubing and casing surfaces. Interchangeable snap‑in dies allow the same tong to accommodate a wide range of pipe sizes from 3‑1/2″ to 5‑1/2″ casing and corresponding tubing.

The XQ140/20 offers two mechanical speed ranges: low gear delivers the full 20 kN·m torque for initial breakout or final make‑up on the heaviest connections, while high gear enables faster spinning to run pipe in or out efficiently – yet still with substantial torque. This two‑speed design optimizes cycle time while maintaining precise torque control under extreme conditions.

In summary, the Teda XQ140/20 hydraulic tubing and casing tong combines massive 20 kN·m torque, automatic back‑up tong operation, bi‑directional gripping, and two‑speed performance into a rugged, field‑proven tool – ideal for ultra‑deep well workovers, heavy casing running, and critical offshore operations where reliability, pipe protection, and maximum torque are paramount.

Hyrig supplies all Teda tongs and genuine spares. For inquiries, pricing, or technical support, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit