The Teda XQ140/12A is a high‑torque, heavy‑duty hydraulic power tong designed for making and breaking large‑diameter tubing and casing connections (up to 140 mm / 5.5″) in well servicing, workover, and drilling operations. The “12A” designation indicates a twelve‑jaw cam system that provides superior grip uniformity, reduced pipe marking, and high torque transmission. Below are the key technical specifications.
| Parameter | Specification |
|---|---|
| Max Torque (Low Gear) | 16.0 kN·m (141,600 in·lb) |
| Max Torque (High Gear) | 7.5 kN·m (66,400 in·lb) |
| Recommended Hydraulic Pressure | 16 – 18 MPa (2,320 – 2,610 psi) |
| Hydraulic Flow Rate | 80 – 100 L/min (21.1 – 26.4 GPM) |
| Tubing / Casing Gripping Range | 73 – 146 mm (2-7/8″ – 5-3/4″) |
| Optional Large Casing Range | Up to 168 mm (6-5/8″) with special dies |
| Speed – High Gear | 15 – 25 RPM |
| Speed – Low Gear | 4 – 8 RPM |
| Total Weight (Main + Back-up) | ~210 kg (463 lbs) |
| Dimensions (L × W × H) | 860 × 510 × 480 mm (33.9″ × 20.1″ × 18.9″) |
| Motor Type | Low-speed high-torque hydraulic motor |
| Control Valve | Manual directional valve, direct mount |
| Clamping Mechanism | Inner-curve cam roller (12‑jaw), bi-directional |
| Back-up Tong Type | Hydraulic, auto-sync clamp & release |
| Die Change | Snap-in, tool-less |
The Teda XQ140/12A delivers exceptional torque for heavy casing and large tubing connections, while the twelve‑jaw design ensures even load distribution and minimal surface damage. Its robust construction is built for continuous oilfield service.
Hyrig supplies all Teda tongs and genuine spares. For technical data, spare parts, or pricing, contact info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.