The XQ140/12A hydraulic power tong is a robust, open‑throat servicing tool manufactured by Yancheng TEDA Drilling and Production Equipment Co., Ltd. It is specifically designed for make‑up and break‑out of tubing, small drill pipe, and small casing in oil and gas well workover operations. With a capacity range of 2⅜" to 5½" (Φ60–140 mm) and a maximum low‑gear torque of 12 kN·m (8850 ft·lbs), the XQ140/12A handles the most demanding thread connections while significantly reducing operator fatigue and improving efficiency.
Wide diameter range – Handles tubing, small drill pipe, and casing from 60 mm up to 140 mm (2⅜" to 5½") in one compact tong.
Open‑throat design – Quick loading and unloading of pipe without threading through the head. Ideal for workover rigs where speed matters.
Four speed/torque combinations – Optimize performance for spinning, low‑torque final make‑up, or high‑torque break‑out.
High torque output – Low gear delivers 12 kN·m (8850 ft·lbs) at 14 rpm – enough for the toughest connections.
Simple, reliable construction – Fewer moving parts than complex multi‑speed systems. Easy to maintain in field conditions.
Proven in land and offshore – Widely used in both environments due to corrosion resistance and durable design.
| Parameter | Value | Unit |
|---|---|---|
| Tubing / pipe range | Φ60 – 140 (2⅜" – 5½") | mm / in |
| Low gear – max torque | 12 / 8850 | kN·m / ft·lbs |
| Second low – max torque | 7.8 / 5750 | kN·m / ft·lbs |
| Second high – max torque | 4.2 / 3100 | kN·m / ft·lbs |
| High gear – max torque | 2.6 / 1900 | kN·m / ft·lbs |
| Low gear – max speed | 14 | rpm |
| Second low – max speed | 24 | rpm |
| Second high – max speed | 42 | rpm |
| High gear – max speed | 72 | rpm |
| Max operating pressure | 12 / 1740 / 122 | MPa / psi / bar |
| Max oil flow | 120 / 32 | L/min / gpm |
| Weight (with backup tong) | 490 / 1080 | kg / lbs |
| Overall dimensions (L×W×H) | 1036 × 621 × 841 | mm |
| Oil Grade | Viscosity | Ambient Temperature Range |
|---|---|---|
| YC‑N46 low‑temp anti‑wear hydraulic oil | 46 cSt @40°C | -20°C to +40°C |
| YB‑N46 anti‑wear hydraulic oil | 46 cSt @40°C | -10°C to +40°C |
| YA‑N46 hydraulic oil | 46 cSt @40°C | 0°C to +40°C |
Filtration requirement – Use a filter with fineness not less than 0.025 mm (25 microns) to protect the hydraulic system.
The four speed/torque combinations allow the operator to select the optimal gear for each phase of the operation:
| Operation Phase | Recommended Gear | Torque Available | Speed |
|---|---|---|---|
| Spinning (low resistance) | High gear | 2.6 kN·m | 72 rpm |
| Final make‑up (medium torque) | Second high | 4.2 kN·m | 42 rpm |
| Break‑out (high torque) | Second low | 7.8 kN·m | 24 rpm |
| Extreme break‑out / stuck threads | Low gear | 12 kN·m | 14 rpm |
Workover rigs (land and offshore)
Tubing running and pulling (2⅜" – 5½")
Small diameter drill pipe make‑up / break‑out
Small casing running and retrieval
High‑torque thread connections (premium connections)
The XQ140/12A bridges the gap between medium‑duty tubing tongs (e.g., XQ89/3C, XQ114/9) and very large casing tongs. It offers four distinct speed/torque combinations – not just two – giving the operator fine control over every connection. The open throat design saves time during pipe handling. With a maximum torque of 12 kN·m, it can handle most stuck threads without requiring a separate backup machine. Its simplicity and reliability have made it a favorite among workover contractors worldwide.
For inquiries, technical data, or to order genuine TEDA parts for XQ140/12A, please contact:
info@hyrig.com
We provide fast response, on‑site training, and full after‑sales support for all XQ series power tongs.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.