Teda XQ140/12A Hydraulic Power Tong – Technical Specifications

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The TEDA XQ140/12A Hydraulic Power Tong is an open-throat workover tong designed for fast make-up and break-out of 2⅜″-5½″ tubing, drill pipe, and casing. Hydraulically driven, it delivers 140kN·m rated torque (160kN·m max), speeds up to 15r/min, and operates at 12MPa. Built with 42CrMo alloy steel jaws and IP54 protection, it withstands harsh oilfield conditions. Optional safety device and accessories available. For all TEDA tongs and parts, contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

Preface

This page provides complete technical specifications for the XQ140/12A Hydraulic Power Tong, covering basic parameters, performance data, structural dimensions, material standards, and optional accessories. All data is based on factory-tested values and complies with industry standards for oilfield workover equipment, ensuring accurate selection, verification, and field installation.


I. Basic Specifications

ParameterValueRemarks
ModelXQ140/12AOpen-throat, hydraulic drive
Pipe range (inches)2⅜″ – 5½″Tubing, small drill pipe, casing
Pipe range (mm)60mm – 140mmDual-unit marking
Rated working pressure12 MPaStandard hydraulic system pressure
Max opening size150 mmFast pipe gripping
Applicable tubularsTubing, small drill pipe, small casingAPI standard & custom

II. Performance Specifications

ParameterValueCondition
Rated torque140 kN·m@12 MPa
Max torque (peak)160 kN·mShort-term peak pressure
Make-up speed8 – 12 r/minNo load
Break-out speed10 – 15 r/minNo load
Hydraulic flow required50 – 80 L/minStandard power unit
Operating temperature-20°C to +60°COnshore/offshore
Continuous operation≥8 hoursFull load
Torque control accuracy±5%Consistent connection quality

III. Structural & Installation Parameters

ParameterValueRemarks
Total weight1800 kg (standard)Includes tong body & control module
Dimensions (L×W×H)1600×850×1200 mmCompact design
Mounting typeGround fixed / vehicle-mountedBase & bolts included
Jaw opening/closingHydraulic automaticOne-key operation
Rotation directionBidirectional (CW/CCW)Make-up & break-out
Control methodWired remote / localRemote distance ≤10m
Hydraulic portG3/4″Quick coupler compatible

IV. Materials & Protection

CategorySpecificationAdvantage
Jaw body material42CrMo alloy steelHigh strength, wear-resistant
Gripper insertCarbide coatingAnti-slip, pipe protection
Main frame materialQ355B carbon steelGood weldability, stable
SealsFKM (fluoro rubber)Oil-resistant, high-temp, durable
Protection ratingIP54Dust & splash proof
Corrosion treatmentSandblasting + electrostatic powder coatingSalt spray & moisture resistant

V. Standard & Optional Accessories

Standard Configuration:

  • Hydraulic power tong body ×1

  • Wired remote control panel ×1

  • Hydraulic hoses (5m each) ×4

  • Quick coupler set ×1

  • Mounting base with bolts ×1

  • Manual, certificate, warranty card ×1

  • Special tool kit (disassembly & adjustment) ×1

Optional Accessories:

  • Wireless remote module (range ≤30m)

  • Torque display meter (real-time monitoring)

  • Extended hydraulic hoses (10m each)

  • Explosion-proof control box

  • Hydraulic oil cooler (for high-temp environments)

  • Spare gripper inserts (various sizes)

  • On-site installation & commissioning service


VI. Standards & Certifications

  • Applicable standards: API Spec 7K (Drilling and Well Servicing Equipment), GB/T 20174-2019

  • Certifications: ISO9001, MA (Mining product safety certification)

  • Patented technology: Hydraulic safety protection device (patent number available upon request)


VII. Notes on Parameters

  • All values are measured under standard configuration. Custom configurations may vary – refer to contract.

  • Standard operating temperature: -20°C to +60°C. For extreme environments (below -40°C or above 70°C), contact us for special customization.

  • Weight and dimensions tolerance: ±3% (normal production range).

  • For detailed verification or custom technical solutions, please contact our support team.


Need the full TEDA power tong range or genuine spare parts?
We supply all TEDA models and all related accessories.

Contact us today:
info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit