TEDA XQ29/1.8 Hydraulic Sucker Rod Tong – Ultra-Light Workover Power Tong

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The TEDA XQ29/1.8 is an ultra‑light hydraulic sucker rod tong specifically designed for making up and breaking out sucker rods during oilfield workover and well servicing operations. Its compact open‑type design handles sucker rods from 5/8″ up to 1‑1/8″ OD, and tubing from 1‑7/8″ to 2‑3/8″. The two‑speed gearbox delivers low gear torque of 1,800 N·m (1,327 ft·lbs) at 40 RPM for demanding break‑out operations, and high gear torque of 700 N·m (516 ft·lbs) at up to 104 RPM for efficient rod running. Features inner curved roller climbing bidirectional clamping mechanism, combined master and backup tong with simultaneous auto‑clamping control, and simple, compact construction. The ultra‑light weight makes it highly portable and ideal for rigs with limited floor space. Rated pressure 10 MPa, flow 65 L/min, weight 105 kg.

Conatct For Details
DetailReview(0)Additional

Complete Technical Overview

The TEDA XQ29/1.8 is an ultra‑light hydraulic power tong specifically designed for making up and breaking out sucker rods during oilfield well workover and service operations. As an opening‑type power tong, it is particularly suited for quick make‑up and break‑out of sucker rod joints. The XQ29/1.8 is recognized as one of the lightest hydraulic power tongs available for sucker rod servicing, making it ideal for rigs with limited floor space and for operations requiring frequent relocation. This product has earned several patents of China, reflecting its unique design and manufacturing quality. The improved XQ29/2.6 model is also available for applications requiring higher break‑out torque.

Key Specifications

The specifications below represent the most comprehensive set compiled from manufacturer and distributor data. Note that flow rate values vary between sources due to differences in test conditions, gear ratio configurations, or measurement standards. Please confirm exact specifications with the manufacturer for your specific hydraulic system.

ParameterValue
ModelXQ29/1.8
Master Tong Range – Sucker Rod5/8″ – 1‑1/8″ (16 – 29 mm)
Master Tong Range – Tubing1‑7/8″ – 2‑3/8″ (48 – 60 mm)
Backup Tong Range – Sucker Rod5/8″ – 1‑1/8″ (16 – 29 mm)
Backup Tong Range – Tubing1‑7/8″ – 2‑3/8″ (48 – 60 mm)
Low Gear Rated Torque1,800 N·m (1,327 ft·lbs) @ 10 MPa
High Gear Rated Torque700 N·m (516 ft·lbs) @ 10 MPa
Low Gear Rated Speed40 RPM
High Gear Rated SpeedUp to 104 RPM
Rated Operation Pressure10 MPa (1,450 psi)
Rated / Max. Flow65 L/min (17 GPM) (some sources indicate up to 80 L/min for higher torque operation downhole)
Dimensions (L×W×H)543 × 334 × 404 mm (21.4″ × 13.2″ × 15.9″)
Weight (including Backup Tong)105 kg (231 lbs)

Key Features

  • Sucker Rod & Tubing Dual-function Capability – Master tong handles 5/8″, 3/4″, 7/8″, 1″, 1‑1/16″, and 1‑1/8″ sucker rods, as well as 1‑7/8″ and 2‑3/8″ tubing. The backup tong covers the same ranges, providing versatile coverage for comprehensive workover operations.-4

  • Two‑Speed Gearbox with High and Low Gear Ratio – Two shifts change the gear ratio between high speed and high torque, delivering high gear at up to 104 RPM for efficient running and low gear at 40 RPM with high torque for demanding make‑up and break‑out.-4

  • Inner Curved Roller Climbing Bidirectional Clamping Mechanism – Both master tong and backup tong employ an inner curved roller climbing and bidirectional clamping mechanism. This design provides self‑centering action and consistent clamping force across the entire pipe range.-4

  • Combined Master and Backup Tong with Auto‑Clamping – The new hydraulic backup tong and the master tong form a combined unit. Operating the manual control valve on the master tong causes the backup tong to automatically clamp or simultaneously loosen, simplifying the operator‘s workload and improving operational efficiency.-4

  • Ultra‑Lightweight Portable Construction – The master tong is driven by a low‑speed high‑torque hydraulic oil motor, with the control valve matching the oil motor directly. The motor is thin and compact, making the overall structure simple, compact, and exceptionally portable. Total weight is only 105 kg.-4

  • Upper Brake Mechanism – The braking mechanism is conveniently positioned above the tong head cover, making adjustments and maintenance simple without extensive disassembly.

  • Adjustable Torque by Oil Supply Pressure – Operators can obtain the optimal make‑up torque for various sucker rod and tubing types by adjusting the oil supply pressure, providing operational flexibility across different connection requirements and conditions.

  • Optional Torque Control Valve – A torque control valve may be equipped to enable precise torque measurement, display, and control for critical rod string connections.

  • Optional Dies for Master Tong – Dies can be equipped to the master tong according to customer request, allowing customized gripping profiles for different sucker rod types and conditions.

Frequently Asked Questions

Q: What is the torque range of the TEDA XQ29/1.8 hydraulic sucker rod tong?
A: Low gear rated torque is 1,800 N·m (1,327 ft·lbs) at 10 MPa system pressure. High gear rated torque is 700 N·m (516 ft·lbs) at 10 MPa. At maximum system pressure (12.5 MPa), low gear torque can reach 2,300 N·m (1,700 ft·lbs). This torque capacity is sufficient for standard sucker rod make‑up and break‑out operations.

Q: Which sucker rod sizes does the XQ29/1.8 cover?
A: The master tong handles sucker rods from 5/8″ up to 1‑1/8″ OD (16–29 mm), covering standard sizes of 5/8″, 3/4″, 7/8″, 1″, 1‑1/16″, and 1‑1/8″. The backup tong covers the same range. For larger sucker rod diameters up to 1‑3/16″, the improved XQ29/2.6 model (with 2,600 N·m low torque) is recommended.

Q: Can the XQ29/1.8 be used for tubing as well as sucker rods?
A: Yes. XQ29/1.8 is a dual‑function power tong capable of handling both sucker rods and tubing. Master tong range includes 1‑7/8″–2‑3/8″ (48–60 mm) tubing in addition to sucker rods, and backup tong covers the same range.

Q: Does the XQ29/1.8 require part changes when switching between sucker rod sizes?
A: Yes. Change dies of different sizes to clip sucker rods of corresponding specifications. Replacement of jaw sets is required, but the process is straightforward, and multiple jaw sets are available for the different diameter ranges.-4

Q: What hydraulic power unit is required?
A: Rated operation pressure is 10 MPa (1,450 psi) and rated flow is 65 L/min (17 GPM). Some sources indicate up to 80 L/min flow for higher torque operation downhole. The flow rating is dependent on gear ratio configuration (high/low gear ratios require different flow volumes). Confirm exact flow requirements with the manufacturer for your specific configuration and downhole depth conditions.

Q: Is the XQ29/1.8 suitable for deep‑well operations?
A: Yes. The XQ29/1.8 is designed for quick make‑up/break‑out of sucker rod threads in well service operations. For deep‑well conditions requiring higher break‑out torque, the improved XQ29/2.6 model provides 2,600 N·m low torque and is built upon the same compact frame as the XQ29/1.8, making it suitable for more demanding downhole conditions.

Complete Product Introduction for engineers & procurement

The TEDA XQ29/1.8 hydraulic sucker rod tong is an ultra‑light, compact power tong widely used in oilfield workover and well service operations involving 5/8″‑1‑1/8″ sucker rods and 1‑7/8″‑2‑3/8″ tubing. It is deployed on onshore workover rigs, offshore well service units, and in mobile field operations across China, the Middle East, Southeast Asia, and other regions. This product has earned several patents of China, and the compact, portable integrated design is the result of continuous improvement over earlier sucker rod power tong models.

The inner curved roller climbing bidirectional clamping mechanism is a key innovation of the XQ29/1.8. Both master and backup tongs utilize this design, which provides self‑centering action and ensures consistent clamping force across the entire pipe range. Unlike more complex designs, the bidirectional mechanism allows operation in both directions simply by changing the direction of the reset knob on the master tong and backup tong.

The combined master and backup tong with auto‑clamping significantly simplifies the control system for the rig operator. The new hydraulic backup tong and master tong form a single integrated unit. Operating the hand control valve on the master tong automatically triggers the backup tong to clamp or release simultaneously with the master tong. This auto‑clamping feature reduces the operator‘s workload, improves cycle times, and enhances operational safety by eliminating separate controls for the backup tong.

The ultra‑lightweight portable construction of the XQ29/1.8 is a major advantage for workover operations. Master tong is driven by a low‑speed high‑torque hydraulic oil motor with the control valve connected directly to the oil motor, resulting in a thin, compact motor profile. Total combined weight is only 105 kg (231 lbs), making this tool one of the lightest hydraulic power tongs available for sucker rod workover operations. The open‑type design of the tong head allows rapid positioning around the sucker rod string, and the compact dimensions (543 × 334 × 404 mm) make handling and storage efficient even on rigs with severely limited floor space.

The two‑speed operation offers exceptional operational flexibility. The XQ29/1.8 has two speeds: high gear is used for efficient rod running when torque requirements are low (high gear torque 700 N·m or 516 ft·lbs); low gear is used for high‑torque make‑up or break‑out operations (low gear torque 1,800 N·m or 1,327 ft·lbs). The upper brake mechanism is positioned above the tong head cover, making adjustment and repair convenient.

For applications requiring higher break‑out torque, the improved XQ29/2.6 model is available. This upgraded version builds upon the XQ29/1.8 platform with the same compact structure and lightweight design, but increases low gear torque from 1,800 N·m to 2,600 N·m (1,918 ft·lbs). The XQ29/2.6 is particularly well‑suited for deep‑well operations where rod threads have become challenging to break out after prolonged exposure to downhole conditions. Conversely, the XQ28/1.8Y variant is also available for smaller rod diameters.

The XQ29/1.8 is fully compatible with optional accessories including torque control valves for precise torque management, dies for the master tong according to customer request, and fine‑tooth dies to further reduce rod surface damage. All units are recommended to be hydrostatically pressure‑tested and functionally tested before shipment.

For detailed 2D/3D drawings, operation manual (PDF), spare parts list, or a quotation tailored to your rig‘s hydraulic system, please contact us:

Email: info@hyrig.com

We reply within 24 hours with technical datasheets and best pricing.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit