This page provides the complete official technical specifications for the TEDA XQ29/1.8 Hydraulic Power Tong, manufactured by Yancheng TEDA. This open-throat power tong is specifically designed for make-up and break-out of sucker rods and tubing in oilfield workover operations. All parameters are factory-tested and comply with SY/T 5074 industry standards.
| Parameter | Value |
|---|---|
| Model | XQ29/1.8 |
| Application | Sucker rod: CYG16 / CYG19 / CYG22 / CYG25 / CYG29; Tubing: φ48–60 mm |
| Jaw opening size | 63 mm |
| Total weight | 105 kg |
| Dimensions (L×W×H) | 543 × 334 × 404 mm |
| Rated system pressure | 10 MPa |
| Maximum oil supply | 65 L/min |
| Gear | Rated Torque | Maximum Speed |
|---|---|---|
| High gear | 0.7 kN·m | 104 RPM |
| Low gear | 1.8 kN·m | 40 RPM |
| Parameter | Specification |
|---|---|
| Drive type | Low-speed high-torque hydraulic motor |
| Clamping mechanism | Internal curve roller climbing + bidirectional clamping |
| Recommended hydraulic oil | YC‑N46 / YB‑N46 / YA‑N46 |
| Operating oil temperature | ≤65°C |
| Inlet/return hose inner diameter | ≥20 mm |
| Requirement | Specification |
|---|---|
| Suspension height | Suspension pulley ≥15 m above ground |
| Pull rope load capacity | ≥1 ton |
| Mounting attitude | Must be horizontal |
Wide compatibility: Fits all CYG series sucker rods (16–29) and φ48–60 mm tubing
Dual-speed operation: High gear for fast spinning, low gear for high torque
Compact & lightweight: Only 105 kg for easy rig-up and transport
Reliable clamping: Internal curve roller climbing mechanism ensures secure grip
Standardized design: Manufactured according to SY/T 5074
Workover and well servicing
Sucker rod running and pulling
Tubing make-up and break-out
Pump maintenance operations
Onshore and offshore oilfields
We supply the full TEDA power tong range, including all models and genuine spare parts.
For inquiries, technical support, or to request a quotation, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.