The VS4 pump is an API 610 vertical single‑stage mixed flow or axial flow centrifugal pump, specifically engineered for ultra‑large flow (up to 20,000+ m³/h) and low head (3–30 m) applications. Its wide flow passages, anti‑clog impeller, and low NPSH design make it the preferred choice for moving massive volumes of water in power plants, municipal systems, coastal facilities, industrial parks, and irrigation projects. Below are the primary application scenarios.
1. Power Plant
Large flow circulating water – Condenser cooling water for thermal and nuclear power plants requiring up to 20,000 m³/h per pump.
River water intake – Pumping raw cooling water directly from adjacent rivers or lakes.
Cooling water main pump – Primary pumps for once‑through or closed cooling water systems.
Thermal power water supply system – Make‑up water for cooling towers and auxiliary cooling.
Why VS4 for power: Ultra‑large flow reduces number of pumps needed. Low NPSH handles low river/tide levels. High efficiency lowers operating cost.
2. Municipal Water & Drainage
Urban flood control drainage – Stormwater pumping stations for flood prevention during heavy rain.
River diversion – Redirecting river flow for water supply or flood management.
Water plant raw water lifting – Pumping from rivers, lakes, or reservoirs to treatment plants.
Large scale water transfer project – Inter‑basin water diversion schemes.
Why VS4 for municipal: Pit mounting saves surface land. Anti‑clog impeller passes debris without failure. Reliable 24/7 flood protection.
3. Seawater & Marine Project
Coastal seawater intake – Pumping seawater for cooling or desalination pre‑treatment (with duplex materials).
Desalination raw water pump – Large volume feed for reverse osmosis or thermal desalination.
Offshore platform cooling water – Vertical pump in caisson or sump.
Why VS4 for marine: Duplex and super duplex materials resist chloride corrosion. Low submergence operation with tidal variations.
4. Industrial Park
Ultra‑large flow circulating water – Central cooling water system for multiple plants in a petrochemical or industrial park.
Chemical park general water supply – Raw water and service water distribution.
Long‑distance water delivery – Booster stations for pipelines requiring massive volume.
Why VS4 for industry: One pump replaces several smaller units. Low vibration, low noise for plant neighbor considerations.
5. Irrigation & Reservoir
Farmland large area irrigation – Flood or sprinkler irrigation from rivers or canals.
Reservoir water discharge – Releasing stored water to downstream agricultural areas.
River basin water diversion project – Moving water between watersheds for irrigation.
Why VS4 for irrigation: Simple design, low maintenance. Electric or diesel top‑mounted motor above flood level. High reliability during peak growing seasons.
Custom Solutions for Site Working Conditions
Custom impeller type – Mixed flow (higher head, up to 30 m) or axial flow (very low head, ultra flow) to match your duty.
Custom column length – Pit depth matched to sump or intake level.
Anti‑corrosion material – Cast iron, 316L, duplex, super duplex, bronze, stainless steel.
Low NPSH optimization – Special hydraulic profiles for extremely low submergence.
Bearing options – Water‑lubricated rubber (standard) or composite (for abrasive water).
Get an Application‑Specific VS4 Pump Recommendation
To help you select the right VS4 pump for your ultra‑large flow application, please send us:
Application name (e.g., “power plant circulating water” or “flood drainage”)
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name (fresh water, seawater, cooling water) and temperature (°C)
Pit depth or submergence (if known)
Any special requirement (impeller type, material, anti‑clog, ATEX, etc.)
Our engineering team will respond within 24 hours with:
Recommended VS4 pump model (mixed or axial flow, size, material)
Performance curve with duty point
API 610 data sheet
Pit installation drawing (2D CAD) and 3D model
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1–OH6, BB1–BB5, VS1–VS7 types) serving global power plants, water utilities, flood control authorities, industrial parks, irrigation districts, and marine projects. Contact us for custom‑engineered VS4 ultra‑large volume axial/mixed flow pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.