This page provides complete technical parameters for our VS4 API 610 vertical single-stage mixed flow or axial flow centrifugal pump. The VS4 is designed for ultra-large flow (up to 20,000 m³/h or more) and very low head (3–30 m) applications such as river water intake, flood drainage, power plant circulating water, and seawater lifting. Its wide flow passages and anti-clog impeller handle debris-laden water reliably.
Performance Range
| Parameter | Value |
|---|---|
| Flow rate | 500 ~ 20,000 m³/h (2,200 ~ 88,000 GPM) – larger on request |
| Total head | 3 ~ 30 m (10 ~ 98 ft) – mixed flow to 30 m, axial flow to 15 m |
| Speed | 370 / 490 / 590 / 740 rpm (low speed for ultra large flow) |
| Medium temperature | 0°C ~ 100°C (32°F ~ 212°F) |
| Maximum working pressure | Up to 10 bar (145 psi) |
| NPSHr | Special optimized low NPSH hydraulic design |
Structural & Mechanical Design
Type: Vertical single-stage mixed flow or axial flow pump (API 610 VS4 designation)
Hydraulic type: Mixed flow (higher head, moderate flow) or Axial flow (very low head, ultra high flow) – optional based on duty
Installation: Vertical column type, concrete pit mounted – pump sits in below-ground concrete pit, motor above grade
Impeller: Large flow passage, anti-block structure – open or semi-open design with generous clearances to pass small debris, fish, or solids
Shaft: Long vertical high-strength shaft – transmits torque from top-mounted motor to submerged impeller
Bearings: Water-lubricated rubber or composite bearings – no external lubrication; pumped water cools and lubricates
Motor: Dry motor top mounted, easy maintenance – motor above flood level, accessible for inspection
Material Options
| Component | Standard Materials | Upgrade Options |
|---|---|---|
| Casing / column | Cast iron, ductile iron | Stainless steel (304/316L) |
| Impeller | Cast steel, stainless steel (304/316L) | Bronze, duplex, super duplex |
| Shaft | Alloy steel (4140) | Stainless steel (316L), duplex |
| Liner & bearings | Wear-resistant rubber, composite material | Bronze, silicon carbide |
Key Design Features Explained
Mixed Flow vs Axial Flow
Mixed Flow: Impeller design that combines radial and axial characteristics. Higher head (up to 30 m) with good flow capacity. Suitable for river intake, irrigation.
Axial Flow: Propeller-style impeller for very low head (3–15 m) and extremely high flow. Ideal for flood drainage, large reservoir circulation.
Ultra Large Flow Capacity
The VS4 handles flows up to 20,000 m³/h in a single unit, reducing the number of pumps required for large-scale water movement.
Anti-Clog Impeller
Wide flow passages and smooth contours allow the pump to pass debris (leaves, small sticks, fish) without clogging – critical for flood drainage and raw water intake.
Low NPSH Performance
Optimized hydraulic design provides excellent low NPSH characteristics, allowing reliable operation with low submergence depths.
Vertical Pit Mounting
The pump is installed in a concrete pit below grade. Only the motor and discharge head are above ground, minimizing visual impact and flood risk.
Water-Lubricated Bearings
Bearings are lubricated by the pumped water itself. No oil or grease – environmentally friendly and low maintenance.
Available Technical Documents (Free Request)
API 610 data sheet (filled with your operating conditions)
Pit installation drawing (2D CAD, PDF/DWG) – shows pit dimensions, column length, discharge layout
Performance curve (head, efficiency, power vs flow – mixed and axial flow options)
3D model (STEP/IGES for plant layout)
Material certificate (EN 10204 3.1 or 3.2)
Typical Applications
River water intake for municipal or industrial supply
Seawater lifting for coastal power plants (duplex materials)
Power plant circulating water (condenser cooling)
Municipal flood drainage and stormwater pumping
Large reservoir water delivery for irrigation
Industrial ultra-large flow circulation (steel mills, desalination pre-treatment)
Get Your VS4 Pump Technical Specification Package
To request a complete documentation package with a formal quotation, please send us your operating conditions:
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name (fresh water, seawater, cooling water) and temperature (°C)
Submergence or pit depth (if known)
Any special requirement (mixed flow or axial flow, material, anti-clog, ATEX, etc.)
Our engineering team will respond within 24 hours with:
Recommended VS4 pump model (mixed or axial flow type, size, material)
Performance curve PDF with duty point
API 610 data sheet
Pit installation drawing (2D CAD) and 3D model link
Bearing and material recommendations
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1–OH6, BB1–BB5, VS1–VS7 types) serving global power plants, water utilities, flood control authorities, irrigation districts, and industrial facilities. Contact us for custom-engineered VS4 mixed flow/axial flow ultra-large volume pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.