This page presents verified field cases of our API 610 VS4 vertical single-stage axial flow or mixed flow pumps operating reliably in ultra-large flow, low head applications. Each case demonstrates the pump's ability to deliver massive volumes, handle debris, operate with low NPSH, and provide long-term energy-efficient performance in power plants, flood control systems, coastal seawater projects, and reservoir water diversion.
Case 1 – Thermal Power Plant Circulating Water (Asia)
Background: A 1,000 MW thermal power plant required river water intake for once‑through condenser cooling. The required flow was 45,000 m³/h from a river with seasonal low water levels and debris (leaves, small fish).
VS4 Pump Solution:
Six VS4 axial flow pump sets (4 duty + 2 standby)
Flow per pump: 11,500 m³/h
Head: 6.5 m
Material: Cast iron column, stainless steel impeller
Installation: Vertical pit mounted, river intake structure
Results:
Ultra-large flow stable operation – total 46,000 m³/h achieved, full condenser cooling at all loads
Remarkable energy saving – axial flow design achieved 88% efficiency, reducing annual energy cost by 18%
Anti‑clog – wide passage impeller passed small debris without blockage
Low NPSH – handled low river levels during dry season without cavitation
Available references: Civil pit drawing, site layout photo, energy consumption comparison.
Case 2 – Municipal Flood Control & Drainage (Southeast Asia)
Background: A coastal city suffered from annual flooding during monsoon seasons. Needed a stormwater pumping station capable of rapid discharge to the sea when water levels rose.
VS4 Pump Solution:
Six VS4 mixed flow pump sets
Flow per pump: 8,200 m³/h
Head: 9.5 m
Speed: 590 rpm
Material: Cast iron casing, bronze impeller
Results:
Fast water discharge – full pumping capacity achieved within 5 minutes of activation
Reliable in rainy season – all pumps operated continuously for 72 hours during a major storm, zero downtime
Simple pit mounting – only discharge head above grade; motors protected from floodwater
Low maintenance – water‑lubricated rubber bearings required no external oil
Available references: Pump station civil drawing, site photos, flood response log.
Case 3 – Coastal Seawater Intake Project (Middle East)
Background: A coastal industrial park needed seawater for cooling and fire water systems. Chloride corrosion was a major concern. The intake structure had tidal variations causing low submergence periods.
VS4 Pump Solution:
Four VS4 axial flow pump sets
Flow per pump: 9,800 m³/h
Head: 7.2 m
Material: Super duplex stainless steel (casing, impeller, shaft)
Installation: Vertical column in seawater intake caisson
Results:
Long-term anti-rust – super duplex showed no pitting or crevice corrosion after 3 years in aggressive seawater
Stable running – handled tidal submergence as low as 1.8 m without cavitation
Continuous operation – 24/7 service with only annual bearing inspection
Low lifecycle cost – higher initial material cost offset by zero corrosion failures
Available references: Material certificate (EN 10204 3.1), caisson layout drawing, site photo.
Case 4 – Large Reservoir Water Diversion (China)
Background: A large reservoir with varying water levels needed a high‑flow pump for irrigation water supply. During drought years, water level dropped significantly, causing low NPSH for conventional pumps.
VS4 Pump Solution:
Three VS4 mixed flow pump sets
Flow per pump: 6,500 m³/h
Head: 18 m
Speed: 740 rpm
Custom column length: 6,200 mm (matched to low water level)
Material: Ductile iron casing, stainless steel impeller
Results:
Low NPSH no cavitation – custom column length kept impeller submerged even at minimum reservoir level
Matched reservoir low water level condition – pump operated reliably during 2‑year drought period
Efficient water diversion – transferred 150,000 m³/day to downstream irrigation canals
Easy maintenance – pull‑out design allowed annual inspection without draining reservoir intake
Available references: Reservoir pit drawing, site photo, water level vs pump performance chart.
What You Can Request From Us for Each Case
Civil pit installation drawings (2D CAD)
Site layout photos above and below grade
Project parameter sheet (flow, head, speed, material, column length)
Operating data (efficiency, power consumption, NPSH performance)
Why Real Project Cases Matter
Field references prove that our VS4 pumps deliver:
Ultra‑large flow, energy‑saving operation in power plant cooling systems
Fast, reliable flood protection in municipal drainage stations
Corrosion‑resistant, stable seawater intake with duplex materials
Low NPSH, custom column solutions for reservoir low water levels
Get the Complete VS4 Pump Case Study Package
We can match your ultra‑large flow, low head conditions to similar successful installations. Request the VS4 pump project case PDF or ask for references in your specific industry.
Email: info@hyrig.com
Please specify your industry (power plant / flood control / seawater intake / reservoir) and we will send relevant case studies, civil pit drawings, and technical data within 24 hours. We also welcome inquiries for custom VS4 axial/mixed flow pump selection and factory direct pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.