XQ29/2.6 Hydraulic Sucker Rod Tong – OEM Wear Parts List (Ready for Purchase)

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
XQ29/2.6 hydraulic sucker rod tong OEM wear parts list – ready for purchase. Master tong (7 parts): 2.6.Z-4 centralizing roller (rod alignment), 2.6.Z-5 support plate (brake support), 2.6.Z-7 centralizing roller shaft, 2.6.Z-39 needle roller 4×25.8, 2.6.Z-41 needle roller 4×31.8 (transmission bearings), 2.6.Z-51 friction plate (brake), 2.6.Z.1-6 jaw die (direct rod gripping). Backup tong (1 part): 2.6.B-6 slip (Glutting) for rod clamping. Common consumables: jaws, slips for CYG16-29, brake friction plates, springs, cotter pins, O-rings, hydraulic seals, high-pressure hoses. Use only OEM parts for safety and performance. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

This list is compiled from manual Chapter 7 wear parts codes, with part names, locations, and functions clearly indicated. Use it directly for procurement.


I. Master Tong Wear Parts (7 items)

Part NumberPart NameFunction / Application
2.6.Z-4Centralizing rollerSucker rod centering and guiding – subject to frequent wear
2.6.Z-5Support plateBrake mechanism support – bears frequent stress
2.6.Z-7Centralizing roller shaftMating shaft for centralizing roller – wears with roller
2.6.Z-39Needle roller 4×25.8Transmission bearing component – high-frequency wear
2.6.Z-41Needle roller 4×31.8Transmission bearing component – high-frequency wear
2.6.Z-51Friction plateBrake component – rapid consumption
2.6.Z.1-6Jaw die (Die)Grips sucker rod – direct contact wear part

II. Backup Tong Wear Parts (1 item)

Part NumberPart NameFunction / Application
2.6.B-6Slip (Glutting)Backup tong rod clamping – high-frequency wear

III. Common Consumable Parts (Required for Operation)

  • Jaw dies and slips matching sucker rod sizes (CYG16, CYG19, CYG22, CYG25, CYG29)

  • Brake friction plates, springs, cotter pins, O-rings

  • Hydraulic seals, high-pressure hoses


Important Notes

  • Always use genuine TEDA OEM parts – non-standard substitutes may cause equipment damage or safety hazards.

  • Refer to part numbers when ordering to ensure correct fit for XQ29/2.6 model.

  • For sucker rod specific sizes (CYG16-29), specify rod diameter when ordering jaw dies and slips.


Contact Us for Genuine Parts

To order wear parts or request a custom spare parts kit, please contact us:

info@hyrig.com

We supply the full range of TEDA genuine parts for all sucker rod power tongs, including XQ29/2.6 and XQ29/1.8.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit