The XQ29/2.6 Hydraulic Sucker Rod Tong is a workover-specific sucker rod thread make-up and break-out device developed by Yancheng TEDA Drilling & Production Equipment Co., Ltd. It is an upgraded version of the XQ29/1.8. The unit is driven by a low-speed high-torque hydraulic motor with a manual control valve. The master tong delivers powerful torque, while the backup tong has a wrench‑type structure. With matching dies and slips, the tool completes make-up and break-out operations efficiently. It features dual‑speed operation (low gear for final tightening, high gear for fast spinning). The low gear provides high torque, making it especially suitable for breaking out stuck sucker rods. The overall structure is compact, simple, and lightweight, offering easy and fast operation – ideal for routine workover sucker rod assembly and disassembly in oilfields.
| Parameter | Value |
|---|---|
| Applicable sucker rod sizes | CYG16, CYG19, CYG22, CYG25, CYG29 |
| High gear rated torque | 1.0 kN·m (700 ft·lb) |
| Low gear rated torque | 2.6 kN·m (1,900 ft·lb) |
| High gear max speed | 98 r/min |
| Low gear max speed | 32 r/min |
| Jaw opening | 62 mm (2.4″) |
| Dimensions (L×W×H) | 686 mm × 415 mm × 516 mm |
| Total weight | 106 kg (234 lb) |
| Rated system pressure | 10 MPa (1,450 PSI) |
| Max oil supply | 80 L/min (21 GPM) |
Strong power adaptability – The low‑gear high‑torque design easily handles stuck, rusted, or difficult sucker rod break-out operations.
Efficient and convenient operation – Dual‑speed shifting (high gear for fast spinning, low gear for final tightening) significantly improves workover efficiency.
Practical and reliable structure – Small footprint, light weight, easy to install and move. Compatible with various workover rigs.
Safe and simple control – Manual control valve with direct drive, combined with safety door and limit design, reduces operational risks.
Routine workover sucker rod make-up and break-out
Stuck or corroded sucker rod removal (low‑gear high torque)
Fast spinning for rod running and pulling (high gear)
Onshore and offshore oilfield workover operations
Upgraded from XQ29/1.8 – improved torque capacity (2.6 kN·m vs. 1.8 kN·m)
Lightweight – only 106 kg, easy for one person to maneuver
Dual‑speed – adapts to different operational stages
Proven TEDA quality – backed by years of oilfield equipment manufacturing experience
For inquiries, technical specifications, or to request a quotation, please contact us:
info@hyrig.com
We supply the full TEDA sucker rod tong range, including all models and genuine spare parts.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.