The XQ89/3YE is the enhanced / heavy‑duty member of the XQ89/3Y hydraulic tubing power tong family. Built on the proven XQ89/3YB and XQ89/3YC platforms, the 3YE model focuses on extreme durability, precise hydraulic control, and easy maintainability – making it the first choice for workover crews who face frequent, severe, or high‑volume tubing make‑up and break‑out operations.
Whether you are dealing with badly rusted connections, continuous long‑shift work, or simply want the most rugged and serviceable tong on the market, the XQ89/3YE delivers.
| Code | Meaning |
|---|---|
| XQ | Workover (X) – Power Tong (Q) |
| 89 | Maximum tubing OD: 89 mm (3½") |
| 3 | Low gear rated torque: 3.0 kN·m |
| Y | Hydraulic drive |
| E | Enhanced / Efficient model |
| Parameter | Value | Unit |
|---|---|---|
| Tubing range | 2⅜" (60 mm), 2⅞" (73 mm), 3½" (89 mm) | in / mm |
| Low gear rated torque (break‑out) | 3.0 (approx. 2213 ft·lb) | kN·m |
| High gear rated torque (make‑up) | 1.1 (approx. 811 ft·lb) | kN·m |
| Low gear speed | 30 | r/min |
| High gear speed | 90 – 100 | r/min |
| Rated system pressure | 10 | MPa |
| Max system pressure | 12.5 | MPa |
| Jaw opening | 95 | mm |
| Weight (master tong, approx.) | 110 | kg |
| Feature | XQ89/3YC | XQ89/3YE (Enhanced) | Benefit |
|---|---|---|---|
| Gripping mechanism | Standard internal curved ramp | Upgraded wear‑resistant rollers & dies | Handles seized, rusted threads – less slipping, longer life |
| Hydraulic control | Standard valve | Optimized cushioning & relief valve | Smoother start/stop, precise torque control, protects threads |
| Cooling & lubrication | Standard | Improved heat dissipation design | Lower oil temperature during continuous heavy use – reduced thermal degradation |
| Maintenance | Conventional | Modular brake & valve | Quick swap of key components – less downtime |
| Safety | Basic door & relief | Safety interlock + overload protection | Tong stops if door open or torque exceeds limit |
| Target usage | Routine workover | Frequent, harsh, high‑volume operations | Maximum durability |
Upgraded internal curved roller climbing mechanism.
Jaw dies and rollers use more wear‑resistant materials.
Performs reliably on seized, rusted, or damaged threads – common in old wells or corrosive environments.
Reduces slipping and re‑positioning.
Enhanced hydraulic cushioning for smooth start/stop – minimizes impact on tubing threads.
Fine‑tuned relief valve allows accurate make‑up torque control.
Protects premium connections from over‑torquing.
Optimized lubrication and heat dissipation in the motor and gearbox.
Maintains lower oil temperature during long shifts or back‑to‑back jobs.
Prevents power loss from thermal degradation.
Key components (brake assembly, directional valve) are modular.
Failed parts can be quickly swapped in the field – no need for complex disassembly.
Minimizes downtime – critical for high‑volume contractors.
Door safety interlock – tong automatically stops if the safety door is not properly closed.
Pressure overload protection – prevents operation when torque exceeds safe limits.
Meets rigorous safety standards for professional workover operations.
| Model | Weight | Torque (Low/High) | Best For | Key Advantage |
|---|---|---|---|---|
| XQ89/3YB | 158 kg | 3.0 / 1.1 kN·m | Light, occasional use | Lowest cost |
| XQ89/3YC | 105 kg | 3.0 / 1.1 kN·m | Routine workover | Lightest, no parts change for 2⅞"/3½" |
| XQ89/3YE | ~110 kg | 3.0 / 1.1 kN·m | Frequent, harsh, high‑volume | Most durable, precise, modular |
The XQ89/3YE is slightly heavier than the 3YC (110 kg vs. 105 kg) due to reinforced components, but offers significantly better durability and serviceability under extreme conditions.
| Scenario | Why XQ89/3YE is the right choice |
|---|---|
| High‑volume workover contractor | Runs 8+ hours/day – needs cooling, durability, and quick repairs. |
| Old wells with rusted / seized threads | Upgraded gripping mechanism breaks out stubborn connections reliably. |
| Premium tubing connections | Precise hydraulic control prevents thread damage. |
| Remote locations with limited maintenance support | Modular design allows field‑swap of brake/valve – less downtime. |
| Safety‑focused organizations | Standard interlock and overload protection meet highest standards. |
Use anti‑wear hydraulic oil ISO VG 46. Maintain oil temperature below 65°C. Keep oil clean with a filter fineness of ≥0.025 mm (25 microns). Recommended flow: 80 L/min at 10 MPa (max 12.5 MPa).
For inquiries, technical data, or to order the XQ89/3YE enhanced hydraulic tubing power tong, please contact:
info@hyrig.com
We provide fast response, on‑site training, and full after‑sales support for the entire XQ series – including YB, YC, and YE models.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.