The XQ89/3YC is a significantly upgraded version of the XQ89/3YB hydraulic tubing power tong, designed for oil well workover operations. While maintaining the same robust torque output, the 3YC model focuses on lightweight construction, ease of use, and maintenance simplicity – making it the preferred choice for modern workover crews.
Compared to the standard XQ89/3YB, the XQ89/3YC is 34% lighter (105 kg vs. 158 kg), yet delivers the same reliable performance for 2⅜", 2⅞", and 3½" tubing. If you frequently move your tong between wells or value operator comfort and efficiency, the XQ89/3YC is the clear winner.
| Code | Meaning |
|---|---|
| XQ | Workover (X) – Power Tong (Q) |
| 89 | Maximum tubing OD: 89 mm (3½") |
| 3 | Low gear rated torque: 3.0 kN·m |
| Y | Hydraulic drive |
| C | Improved version (vs. B model) |
| Parameter | XQ89/3YB (Standard) | XQ89/3YC (Improved) | Benefit |
|---|---|---|---|
| Tubing range | 60, 73, 89 mm | 60, 73, 89 mm | Same wide coverage |
| Low gear torque | 3.0 kN·m | 3.0 kN·m | Same high break‑out power |
| High gear torque | 1.1 kN·m | 1.1 kN·m | Same make‑up torque |
| Low gear speed | 30 r/min | 30 r/min | Same |
| High gear speed | 100 r/min | 90 r/min | Slightly lower – still efficient |
| Jaw opening | 95 mm | 95 mm | Same |
| System pressure | 10 MPa | 10 MPa | Same |
| Weight (with backup) | 158 kg | 105 kg (↓53 kg) | 34% lighter – huge difference |
| Dimensions | 650×430×550 mm | More compact | Easier to handle |
Weight reduced from 158 kg to 105 kg – a 53 kg (34%) reduction.
One of the lightest tubing tongs in its size class.
Significantly easier to lift, carry, and position on the rig floor.
Reduces operator fatigue during frequent moves between wells.
New internal curved ramp (inner curve climbing) jaw system.
When switching between 2⅞" (73 mm) and 3½" (89 mm) tubing, no jaw or parts change is required.
Saves time and eliminates the risk of losing small components.
The brake mechanism is now mounted on top of the tong cover.
Adjusting or repairing the brake no longer requires major disassembly.
Fast, simple, and reduces downtime.
H‑type manual directional valve connected directly to the motor.
More compact layout, fewer potential leak points.
Quicker response and smoother operation.
Standard auto‑open/close safety door.
Built‑in relief valve for overload protection.
Meets modern workover safety requirements.
| Operation | Gear | Torque | Speed | Application |
|---|---|---|---|---|
| Fast spinning / running in | High | 1.1 kN·m | 90 rpm | Efficient thread engagement |
| Final make‑up | High or Low | 1.1–3.0 kN·m | 90–30 rpm | Tighten to spec |
| Break‑out / back‑out | Low | 3.0 kN·m | 30 rpm | Loosen tight or seized connections |
The slightly lower high‑gear speed (90 rpm vs. 100 rpm on the YB) is a minor trade‑off for the dramatic weight reduction and improved handling. Most crews will not notice the difference in cycle time.
Mobile workover rigs that move frequently between wells – weight matters.
Single‑operator or small crews – lighter tong means less manpower needed.
Routine tubing make‑up and break‑out for 2⅜", 2⅞", and 3½" strings.
Well servicing companies looking to reduce workplace injuries from heavy equipment handling.
| Consideration | Choose XQ89/3YB | Choose XQ89/3YC (Recommended) |
|---|---|---|
| Budget | Lower initial cost | Slightly higher, but better value |
| Weight sensitivity | Not a priority | Critical – 34% lighter |
| Frequency of moving | Rare | Frequent – major advantage |
| Parts change for 2⅞"/3½" | Requires change | No parts change – time saver |
| Brake maintenance | More disassembly | Top‑mounted – quick access |
| Overall recommendation | Limited use | First choice for most crews |
Verdict: For nearly all modern workover operations, the XQ89/3YC is the superior choice. The weight reduction alone transforms daily handling, while the no‑parts‑change feature and easier brake access further boost productivity.
Use anti‑wear hydraulic oil ISO VG 46. Maintain oil temperature below 65°C. Keep oil clean with a filter fineness of ≥0.025 mm (25 microns). Recommended flow: 80 L/min at 10 MPa.
For inquiries, technical data, or to order the XQ89/3YC lightweight tubing power tong, please contact:
info@hyrig.com
*We provide fast response, on‑site training, and full after‑sales support for all XQ series tubing tongs – including XQ89/3YB, XQ89/3YC, and XQ89/3YF.*
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.