The XQ89/3YB hydraulic tubing power tong is a field‑proven workover tool manufactured by Yancheng TEDA Drilling and Production Equipment Co., Ltd. It is specifically designed for make‑up (running in) and break‑out (pulling out) of standard oil tubing in the 60–89 mm (2⅜″, 2⅞″, 3½″) range. With a compact structure, dual‑speed transmission, and hydraulic synchronized backup tong, the XQ89/3YB is the go‑to tool for routine well servicing operations.
| Code | Meaning |
|---|---|
| XQ | Workover (X) – Power Tong (Q) |
| 89 | Maximum tubing OD: 89 mm (3½″) |
| 3 | Low gear maximum rated torque: 3.0 kN·m |
| Y | Hydraulic drive |
| B | Series code (standard model) |
| Parameter | Value | Unit |
|---|---|---|
| Tubing range | φ60, φ73, φ89 (2⅜″, 2⅞″, 3½″) | mm / in |
| High gear rated torque | 1.1 (approx. 811 ft·lb) | kN·m |
| Low gear rated torque | 3.0 (approx. 2213 ft·lb) | kN·m |
| High gear speed | 100 | r/min |
| Low gear speed | 30 | r/min |
| System pressure | 10 | MPa |
| Jaw opening | 95 | mm |
| Weight (with backup) | 158 | kg |
| Dimensions (L×W×H) | 650 × 430 × 550 | mm |
High gear (1.1 kN·m @100 rpm) – Fast spinning for efficient make‑up.
Low gear (3.0 kN·m @30 rpm) – High torque for breaking out tight or seized connections.
Covers the full range of tubing work – from rapid running to stubborn break‑out.
Master and backup tongs clamp and release simultaneously.
Prevents tubing string from rotating during make‑up or break‑out.
Safer and faster – no separate manual backup required.
One set of jaws fits multiple tubing diameters (2⅜″, 2⅞″, 3½″).
Strong gripping force – reduces slipping and thread damage.
Fewer parts to change between jobs.
Dimensions: 650×430×550 mm – fits easily in tight wellhead areas.
Weight: 158 kg (including backup) – manageable for mobile workover rigs.
| Operation Phase | Recommended Gear | Torque | Speed |
|---|---|---|---|
| Spinning / running in | High gear | 1.1 kN·m | 100 rpm |
| Final make‑up | High gear (or low for high torque) | 1.1–3.0 kN·m | 100–30 rpm |
| Break‑out / back‑out | Low gear | 3.0 kN·m | 30 rpm |
The XQ89/3YB is optimized for standard workover conditions – where tubing connections are not severely corroded or over‑torqued. For extremely tight or rusted connections, consider the higher‑torque models in the XQ89 series.
Routine workover operations on standard oil wells.
Land wells with 2⅜″, 2⅞″, or 3½″ tubing strings.
Mobile workover rigs where weight and size matter.
General tubing running and pulling – the primary general‑purpose tool for most workover crews.
| Model | Difference from XQ89/3YB |
|---|---|
| XQ89/3YC | Improved hydraulic system and操控性 (handling) – upgraded version. |
| XQ89/3YF | Adds torque gauge and safety valve – enables precise make‑up torque control. |
Proven reliability – Thousands in field use across China and export markets.
Balanced performance – High speed for efficiency, low torque for break‑out.
Easy maintenance – Top‑mounted brake, modular jaw system.
Cost‑effective – Lower initial cost than heavy‑duty large‑bore tongs, yet covers 90% of standard tubing work.
For workover contractors who primarily handle 2⅜″–3½″ tubing under normal conditions, the XQ89/3YB is the smart, economical choice.
Use anti‑wear hydraulic oil ISO VG 46. Maintain oil temperature below 65°C. Keep oil clean with a filter fineness of ≥0.025 mm (25 microns). Recommended flow: 80 L/min at 10 MPa.
For inquiries, technical data, or to order genuine TEDA parts for XQ89/3YB, please contact:
info@hyrig.com
*We provide fast response, on‑site training, and full after‑sales support for all XQ series tubing tongs (XQ89/3YB, XQ89/3YC, XQ89/3YF, and others).*
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.