High-Pressure Surface Testing Control Unit
The High-Pressure Surface Testing Control Unit is essential surface equipment during formation testing and production testing operations. It is primarily composed of the following components:
Wellhead Control Head
Surface Safety Valve (SSV)
Data Header
Desander
Choke Manifold
Annular Manifold
Heat Exchanger
Three-Phase Separator
Surge Tank (or Buffer Tank)
Diverter Manifold
The Control Head is a critical piece of surface well control equipment used during drill stem testing, well completion, and well intervention operations. It serves as the primary interface between the wellbore and the surface testing tree or flow control equipment.
Its dual primary functions are to provide a high-pressure seal around the tubulars (drill pipe, tubing, or coiled tubing) and to facilitate the safe lifting and suspension of the entire downhole assembly. Constructed from high-grade, sour-service compatible alloys where required, it features a robust body with integrated side outlets for fluid diversion to the choke manifold. Available in both upper and lower lifting structure types, it offers flexibility for different rig-up configurations. Built to rigorous standards, this component is essential for maintaining well control while allowing for the safe and efficient evaluation of well potential.
| Parameter | Specification |
|---|---|
| Working Pressure Range | 42 ~ 105 MPa (6,000 ~ 15,000 PSI) |
| Nominal Bore Diameter | 2", 2-1/2", 3" |
| Lifting Capacity | 1500 ~ 2000 kN |
| Working Conditions | Standard, H₂S (Sour Service) |
| Primary Materials | High-Yield Alloy Steel, H₂S Compatible Grades for Sour Service |
| Model | Working Pressure | Structure Type | Side Outlet Connection | Under-part Thread | Working Condition |
|---|---|---|---|---|---|
| CH07-70-2X | 70 MPa | Upper Lifting | 2" FIG1002 | Drill rod thread 311, 411, or tube thread TBG | Standard |
| CH07-70-2X | 70 MPa | Upper Lifting | 2" FIG1502 | Drill rod thread 311, 411, or tube thread TBG | H₂S |
| CH07-70-2X | 105 MPa | Upper Lifting | 2" FIG1502 | Drill rod thread 311, 411, or tube thread TBG | Standard |
| CH07-70-2.5S | 70 MPa | Lower Lifting | 2" FIG1502 | Not Specified / Custom | Standard |
| CH07-70-2.5S | 105 MPa | Lower Lifting | 2" FIG1502 | Not Specified / Custom | Standard |
A Data Head is a fundamental component in high-pressure well testing and production systems, functioning as a specialized adapter and access point. It is typically installed between the wellhead or tree and the primary flow control equipment (such as a choke manifold or lubricator).
Its primary purpose is to provide a secure, high-pressure conduit for the wellbore fluid while incorporating multiple ports for critical instrumentation. These ports allow for the installation of pressure gauges, transducers, and chemical injection points, enabling real-time monitoring of wellbore pressure and annulus pressure. Manufactured from high-grade alloy steels with optional H2S trim, the Data Head is engineered to withstand the extreme pressures and corrosive environments encountered in modern oil and gas operations. Its robust design ensures data integrity and operational safety, making it an indispensable tool for accurate well management.
| Category | Parameter | |
|---|---|---|
| General Specifications | ||
| Working Pressure Range | 42 ~ 105 MPa | |
| Standard Connections | Union (FIG), API Flange | |
| Working Conditions | Standard, H₂S (Sour Service) | |
| Model-Specific Specifications | ||
| Model | Working Pressure | Connection Type & Size |
| DH06S-42-2Y | 42 MPa | 2" FIG602 Union |
| DH06S-70-3Y | 70 MPa | 3" FIG1002 Union |
| DH06S-105-3Y | 105 MPa | 3" FIG1502 Union |
| DH06S-35-80F | 35 MPa | 3 1/8" - 5000 psi API Flange |
| DH06S-70-78F | 70 MPa | 3 1/16" - 10000 psi API Flange |
| DH06S-105-78F | 105 MPa | 3 1/16" - 15000 psi API Flange |
| DH06S-35-103F | 35 MPa | 4 1/16" - 5000 psi API Flange |
| DH06S-70-103F | 70 MPa | 4 1/16" - 10000 psi API Flange |
| DH06S-105-103F | 105 MPa | 4 1/16" - 15000 psi API Flange |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.