Standpipe Manifolds

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Flexible Configuration: Enables multiple piping arrangements (single/double riser with single/double ground) to meet diverse drilling operational requirements

High-Pressure Reliability: Engineered to withstand 35-70 MPa operating pressures with optimal integrity under extreme drilling conditions

Advanced Material Technology: Certified for standard, low-temperature (-46°C) and sour service (H₂S) environments per API 6A and NACE MR0175 standards

Optimized Flow Path: Precision-engineered connections between riser and ground pipelines ensure efficient fluid transfer to top drive systems

Rugged Platform Design: Specifically engineered for drill floor installation with union/flange connections for secure, maintenance-friendly operation
Conatct For Details
DetailReview(0)Additional

Product Introduction:
Standpipe Manifolds serve as critical interconnection systems installed on drilling platforms, providing essential flow paths between riser pipes and ground pipelines. These robust manifolds direct drilling fluid to top drive units or faucets through configurable piping arrangements that adapt to specific drilling technological needs. The system supports various combinations including single pipe single ground, single pipe double ground, double riser pipe single ground, and double riser double ground configurations. Manufactured to stringent industry standards, standpipe manifolds ensure reliable performance in the most demanding drilling environments while maintaining operational safety and efficiency.


Parameter Table:

ParameterSpecification
Working Pressure35-70 MPa (5000-10,000 psi)
Nominal Diameter50-125 mm (2"-5")
Temperature Rating-46°C to 121°C (Level L-U)
Connection TypesUnion or Flange
Service ConditionsStandard, Low Temperature, Sour Service (H₂S)
Compliance StandardsSY/T5244, API 6A, NACE MR0175
Configuration OptionsSingle/Double Riser with Single/Double Ground

Note: These manifolds support customizable riser-ground pipeline combinations to match specific drilling platform requirements and operational protocols.

Model Specifications for Standpipe Manifolds (LG Series)

ModelNominal Diameter (mm)Nominal Pressure (MPa)
LG50-355035
LG50-705070
LG102-3510235
LG102-7010270
LG125-3512535
LG125-7012570



Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit