Our Fracture Manifold system forms the critical backbone of your well stimulation operation, managing the high-volume, high-pressure flow of fracturing fluid from the pumps to the wellhead. Engineered for resilience and peak performance, this integrated system is designed to handle the immense pressures and abrasive fluids inherent in modern fracturing.
The manifold combines large-diameter low-pressure intake lines with high-strength, smaller-diameter high-pressure discharge sections. This configuration ensures efficient fluid management, minimizing friction losses and providing a safe, controlled flow path. Key components include pump discharge manifolds, high and low pressure combination manifolds, surface pipelines, and wellhead protectors, making it a complete and reliable solution for your most challenging sites.
| Component | Parameter | Value Range |
|---|---|---|
| High-Pressure Parts | Working Pressure | 35 MPa ~ 140 MPa (5,000 psi ~ 20,000 psi) |
| Nominal Diameter | 50 mm ~ 102 mm (2 inch ~ 4 inch) | |
| Low-Pressure Parts | Nominal Diameter | 203 mm ~ 305 mm (8 inch ~ 12 inch) |
| Typical Materials | High-Pressure Body & Fittings | Forged Carbon Steel (e.g., AISI 4130/4140) |
| Low-Pressure Piping & Headers | High-Strength Carbon Steel (e.g., API 5L X52/X60) | |
| Connection Standards | High-Pressure | Weco® 4B15 Union, Flanged, or other API standards |
| Low-Pressure | ANSI/ASME B16.5 Flanges or Quick-Connect Couplings |
Our Discharge Manifolds are critical components designed to safely and efficiently distribute high-pressure fluid from a single pump source to multiple downstream lines or tools. They are the central hub for high-pressure operations in industries such as oil and gas, water blasting, hydrostatic testing, and mining.
Crafted for extreme duty, each manifold is machined from high-strength materials to guarantee longevity and fatigue resistance. The internal flow paths are optimized to minimize turbulence and pressure drop, ensuring consistent performance. Standard features often include pressure gauge ports for real-time monitoring, bleed-off valves for safe depressurization, and a modular design that allows for customization to meet specific site requirements. By centralizing control and enhancing safety, our manifolds are an indispensable asset for any high-pressure operation, delivering reliability you can count on.
| Parameter | Specification |
|---|---|
| Working Pressure | 35 ~ 140 MPa |
| Nominal Diameter | 2" ~ 3" |
| Pressure Rating | 5,000 ~ 20,000 PSI |
| Connection Type | High-pressure threaded (e.g., API thread) or Flanged |
| Material | High-Strength Alloy Steel, Stainless Steel |
| Test Pressure | 1.5 x Maximum Working Pressure |
| Application | Pressure Testing, Water Jetting, Well Servicing |
The Fracturing Wellhead Protector is an engineered safety device critical for modern well stimulation operations. It is designed for scenarios where the required service pressure for fracturing or acidizing exceeds the pressure rating of the installed wellhead.
This system is installed directly above the existing wellhead, creating a high-pressure conduit that bypasses and protects the lower-rated equipment underneath. It effectively contains the extreme pressures and directs the abrasive fluid flow, safeguarding the permanent wellhead from potential damage or fatigue. Once the high-pressure operation is complete, the protector is simply detached. Its robust construction allows for inspection, maintenance, and repeated use on multiple wells, making it an indispensable and economical asset for any completion fleet, ensuring both safety and significant cost savings.
The High-Low Pressure Combination Manifold is an advanced fluid management system engineered for the complex requirements of modern hydraulic fracturing operations. It serves as the central hub, intelligently designed to handle both the intense pressures of the fracturing process and the high-volume, low-pressure stages such as proppant-laden fluid intake or flowback.
This dual-functionality is achieved through dedicated flow paths: high-pressure lines constructed from premium alloy steels to safely contain extreme pressures up to 140 MPa, and large-diameter low-pressure lines designed for efficient volumetric flow with minimal pressure drop. By consolidating these systems, it streamlines the entire surface fluid handling process, reduces overall equipment count, and enhances operational control. Built for durability and safety with full compliance with industry standards, this manifold is the smart, integrated solution for maximizing efficiency and safety on the pad.
| Parameter | Specification |
|---|---|
| High-Pressure Section | |
| Working Pressure | 42 ~ 140 MPa (6,000 ~ 20,000 PSI) |
| Nominal Diameter | 2" ~ 3" |
| Low-Pressure Section | |
| Working Pressure | Typically 5 ~ 10 MPa (725 ~ 1,500 PSI) [Note: To be confirmed] |
| Nominal Diameter | 8" ~ 12" |
| Design Standards | ASME B31.3, API 6A (for relevant components) |
| Material (High-Pressure) | High-Yield Alloy Steel (e.g., AISI 4140/4340) |
| Material (Low-Pressure) | Carbon Steel (e.g., ASTM A106 Grade B) or Abrasion-Resistant Steel |
| Connection Types | Flanged (e.g., API 6A, ANSI), Hammer Union, or Butt-Weld |
| Features | Integral block-and-bleed valves, pressure gauge ports, bleed-off valves, custom configurations available |
The Feeding Manifold is a precision-engineered component essential for modern hydraulic fracturing fluid management systems. It acts as a central distribution and buffer unit, typically mounted on the suction side of high-pressure plunger pumps.
Its primary function is to receive and consolidate low-pressure fluids and additives from the blender unit or auxiliary tanks and feed them steadily to the high-pressure frac pumps. The manifold's internal volume (20L-50L) is crucial for dampening pressure fluctuations and ensuring a smooth, continuous flow, which is vital for pump efficiency and longevity. Available in single or double-wing configurations, it offers operational flexibility, allowing for simultaneous multiple fluid paths or a dedicated backup line. Engineered for durability and safety with high-pressure ratings and reliable connections, this manifold is a key asset for maintaining consistent and efficient pumping operations.
| Parameter | Specification |
|---|---|
| Working Pressure | 42 ~ 105 MPa (6,000 ~ 15,000 PSI) |
| Nominal Diameter | 2" ~ 3" |
| Volume | 20 L, 30 L, 50 L (Standard options, custom available) |
| Configuration | Single Wing or Double Wing |
| Design Standards | ASME B31.3, API 6A (for relevant components) |
| Primary Material | High-Yield Alloy Steel (e.g., AISI 4140/4340) with corrosion-resistant coating |
| Connection Type | Flanged (e.g., API 6A, ANSI) or High-Pressure Threaded |
| Standard Features | Pressure gauge ports, bleed valves, access hatches for inspection/cleaning |
| Application | Hydraulic Fracturing, Cementing, High-Pressure Fluid Injection |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.