Product Introduction:
Parallel Pump Manifolds are critical flow management systems designed to aggregate drilling fluid from multiple mud pumps or distribute returning fluid from the wellbore. These robust manifolds enable seamless pump integration, allowing combined operations where pumps can function as primary, standby, or alternate units. This strategic configuration ensures continuous drilling operations even during maintenance cycles, eliminating costly downtime. The system's engineering prioritizes fluid dynamics optimization and operational reliability, with common implementations including double-pump and triple-pump manifolds tailored to specific drilling requirements and redundancy needs.
Parameter Table:
| Parameter | Specification |
|---|---|
| Working Pressure | 35-70 MPa (5000-10000 psi) |
| Nominal Diameter | 50-125 mm (2"-5") |
| Temperature Level | -46℃ to 121℃ (Level L-U) |
| Connection Types | Union or Flange |
| Working Conditions | Standard, Low Temperature, Acid Service (H₂S) |
| Manufacturing Standards | SY/T5244, API 6A, NACE MR0175 |
| Common Configurations | Double-Pump Manifold, Triple-Pump Manifold |
Model Specifications for Manifold for Parallel Pumps (BG Series)
| Model | Nominal Diameter (mm) | Nominal Pressure (MPa) |
|---|---|---|
| BG50-35 | 50 | 35 |
| BG50-70 | 50 | 70 |
| BG102-35 | 102 | 35 |
| BG102-70 | 102 | 70 |
| BG125-35 | 125 | 35 |
| BG125-70 | 125 | 70 |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.