Product Introduction:
Drilling Fluid Manifolds are critical components designed to connect mud pumps, top drive systems, and auxiliary fluid lines on drilling rigs. They enable efficient injection and return of drilling fluid, supporting seamless circulation during drilling operations.
Our manifolds incorporate parallel and vertical piping arrangements, high-pressure hose assemblies, valves, and monitoring instruments. The innovative goose-neck T-structure ensures compactness and minimal pressure loss, while high-quality materials and rigorous manufacturing standards guarantee durability in challenging environments. Ideal for onshore and offshore applications, these manifolds offer reliability and performance where it matters most.
Parameter Table:
| Parameter | General Range | Specific Model (Example) |
|---|---|---|
| Working Pressure | 35–70 MPa (5000–10,000 psi) | 75 MPa |
| Nominal Diameter | 50–125 mm (2"–5") | 102 mm |
| Temperature Rating | -46°C to 121°C (Level L-U) | -46°C to 121°C |
| Connection Type | Union or Flange | Union/Flange |
| Operating Conditions | Standard, Low-Temp, Acidic (H₂S) | Sour Service (H₂S) |
| Compliance Standards | API 6A, SY/T5244, NACE MR0175 | API 6A, NACE MR0175 |
| Model | Nominal Diameter (mm) | Nominal Pressure (MPa) |
|---|---|---|
| ZG102-35 | 102 | 35 |
| ZG102-70 | 102 | 70 |
| ZG102-75 | 102 | 75 |
| ZG50-75 | 50 | 75 |
| ZG125-75 | 125 | 75 |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.