Sewage pumps are specially designed to transport wastewater, domestic sewage, industrial effluent, and fluids containing suspended solids, fibers, and small solid particles. They feature clog resistance, anti‑wrapping design, corrosion resistance, and the ability to operate continuously or intermittently. Based on API 610 construction, three pump types are most commonly used for sewage and wastewater service.
API 610 Configurations for Sewage Duty
OH2 Sewage Pump (Horizontal Overhung, Centerline Mounted)
Single‑stage, end suction, back pull‑out design. Simple structure, easy maintenance, low cost. Suitable for medium to low pressure municipal sewage transfer, factory effluent circulation, and lift stations with dry well installation. Flow 20‑1500 m³/h, head 15‑100 m.
VS6 Submersible Sewage Pump (Vertically Suspended, Direct Coupled)
Motor and pump integrated, fully submerged in wet well or sump. No above‑ground footprint, no foundation required. Ideal for deep pits, wet wells, and confined spaces. Equipped with waterproof sealed motor (IP68), thermal sensors, and leakage detection. Automatic coupling system for easy retrieval. Flow 10‑2000 m³/h, head 10‑60 m.
BB2 Sewage Pump (Horizontal, Double Suction, Between Bearing)
Single‑stage, double‑suction impeller, axially split casing. High flow capacity, low NPSH, balanced axial thrust. Used in large municipal wastewater treatment plants as trunk main transfer pumps and long distance effluent pipelines. Flow 500‑5000 m³/h, head 20‑120 m.
Key Design Features for Sewage & Wastewater
Non‑clogging impeller: Open or semi‑open design with large flow passages (free passage up to 80 mm or more). Prevents wrapping of fibers, rags, plastics, and other debris.
Cutter / grinder option: For heavy solids or fibrous media, a cutter impeller or grinder mechanism shreds solids before they enter the pump – reduces clogging risk.
Corrosion resistant materials: Cast iron or ductile iron for standard sewage; 304 or 316 stainless steel for aggressive industrial wastewater, acidic or alkaline effluents, and saline sewage.
Reliable sealing: For horizontal pumps – API 682 mechanical seals (single or dual) with external flush or Plan 11. For submersible pumps – double mechanical seals in oil chamber with seal failure sensors.
Submersible motor protection: IP68 rated, class H insulation, moisture sensors, over temperature protection, and leak detectors in oil chamber.
Main Applications
Municipal domestic sewage collection and lift stations
Industrial process wastewater and factory effluent discharge
Building basement drainage and sewage ejection
Oilfield / chemical plant oily water collection
Water treatment plant feed, return sludge, and waste sludge transfer
Operating Conditions
| Parameter | Range |
|---|---|
| Media | Raw sewage, effluent, fiber‑laden water, light slurry, pH 5‑10 |
| Temperature | 0‑60°C (higher with special seals) |
| Free passage | Up to 80 mm (open impeller) |
| Solid handling | Soft solids, rags, plastics, sand (with cutter option) |
| Installation | Dry well (OH2/BB2) or submerged wet well (VS6) |
Advantages of API 610 Sewage Pumps
Clog resistance: Large flow passages and optional cutter reduce downtime caused by wrapping.
Easy maintenance: Back pull‑out for OH2; auto‑coupling for VS6.
Adaptability: Same hydraulic platform can be supplied in horizontal or vertical submersible versions.
Corrosion options: 316SS for aggressive industrial wastewater.
Compliance: API 610 (OH2/BB2) or API 610 VS6 construction with appropriate materials.
Selection Guidelines
For dry pit, clean access, low maintenance cost → OH2 horizontal sewage pump.
For wet well, limited space, deep sump → VS6 submersible sewage pump with auto‑coupling.
For high flow municipal trunk line → BB2 double suction sewage pump.
For heavy solids, rags, or long fibers → specify cutter / grinder impeller.
For aggressive industrial effluent (acids, caustics, solvents) → upgrade to 316 stainless steel or super duplex.
For complete technical datasheets, impeller selection, or a quotation for any API 610 sewage pump (OH2, VS6, BB2), please contact info@hyrig.com. We respond within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.