Boiler Feed Water Pump | API 610 BB3 / BB5 Multistage Pump | China Barrel Pump Manufacturer

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 610 BB3 (axially split) and BB5 (barrel) multistage boiler feed water pumps. Designed for high pressure (up to 450 bar) and high temperature (up to 450°C). Ideal for power plants, cogeneration, and industrial high‑pressure services. China barrel pump manufacturer.

Conatct For Details
DetailReview(0)Additional

A boiler feed water pump is the heart of any steam power plant or industrial boiler system. Our API 610 BB3 and BB5 multistage pumps are purpose‑built for high‑pressure, high‑temperature boiler feed service. Both designs fully comply with API 610 11th/12th edition (ISO 13709) – the global standard for refinery, power, and heavy‑duty process pumps.

BB3 vs. BB5 – which one for your duty?

  • BB3 (axially split, between‑bearings, multistage) – Casing splits horizontally along the shaft. Easy internal inspection without disconnecting piping. Suitable for moderate to high pressures (typical up to 150 bar), flow up to 2000 m³/h, head up to 2000 m.

  • BB5 (radially split barrel casing, between‑bearings, multistage) – Outer barrel contains the internal stage assembly. Designed for extremely high pressures (up to 450 bar) and severe thermal transients. Preferred for supercritical and ultra‑supercritical boiler feed. Flow up to 2500 m³/h, head up to 4000 m.

Both types are between‑bearings construction, providing excellent rotor dynamics for high‑speed operation.

Key design features

  • Multistage hydraulic design – 3 to 20+ stages to achieve very high heads with minimal NPSH requirement.

  • Opposed impeller arrangement (optional) – Self‑balances axial thrust, eliminating balance disc/drum wear.

  • Heavy duty bearings – Tilt‑pad or multi‑lobe journal bearings with Kingsbury type thrust bearings. Oil mist or forced lubrication optional.

  • API 682 seal compatibility – High‑pressure mechanical seals or advanced labyrinth seals for steam/water service.

  • High temperature capability – Up to 450°C with proper thermal expansion management and centerline support.

  • Materials – Carbon steel (WCB/WCC), 12% chrome (CA6NM), stainless steel (304/316/410), or duplex.

  • Barrel material (BB5) – Forged or cast steel barrel certified to withstand full discharge pressure.

Typical performance range

ParameterBB3 (axially split)BB5 (barrel)
Flow rate50 – 2000 m³/h100 – 2500 m³/h
HeadUp to 2000 mUp to 4000 m
Max discharge pressure150 bar450 bar
TemperatureUp to 400°CUp to 450°C
SpeedUp to 6000 rpmUp to 7000 rpm (with VSD)

Typical applications

  • Power plants – Subcritical, supercritical, ultra‑supercritical boiler feed.

  • Industrial cogeneration – Refinery, chemical, paper mill steam boilers.

  • Combined cycle (HRSG) – High pressure feedwater pumping.

  • Nuclear conventional island – Secondary side feed (non‑nuclear).

  • Desalination – High pressure reverse osmosis feed.

  • Oil & gas steam injection – Enhanced heavy oil recovery.

Why choose our BB3/BB5 boiler feed pump?

  • Full API 610 compliance – Hydraulic performance, vibration, and mechanical run tests witnessed as required.

  • High efficiency – CFD‑optimized impellers/diffusers reduce power consumption and lifecycle cost.

  • Robust rotor dynamics – Lateral critical speed analysis, balance quality per API 610.

  • Competitive lead time – Standard designs available, custom barrels with shorter delivery than traditional suppliers.

  • Lower total cost – Competitive upfront price + high MTBR (mean time between repairs).

  • Global spare parts support – Impellers, shafts, stage pieces, wear rings, bearings, seals shipped worldwide.

Quality assurance

  • ISO 9001:2015 certified.

  • API 610 performance test, NPSH test, mechanical run test with vibration & bearing temperature monitoring.

  • Material traceability EN 10204 3.1 / 3.2.

  • NDE – MT, PT, UT, RT as per spec.

  • Hydrostatic test of barrel casing (BB5) or casing halves (BB3).

How to specify your boiler feed water pump

Please provide: flow (m³/h), head (m), inlet pressure (bar), operating temperature (°C), specific gravity, NPSHa, and preferred construction (BB3 or BB5). We will recommend stage count, material class, seal plan, bearing type, and driver options.

Contact us

For a quotation or technical discussion on boiler feed water pumps (API 610 BB3 / BB5):

info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit