A water injection pump is a critical component in oilfield waterflood operations and produced water reinjection systems. Our API 610 BB5 multistage barrel pump is specifically engineered for high‑pressure, high‑reliability water injection service. It fully complies with API 610 11th/12th edition (ISO 13709) – the global standard for refinery, oilfield, and heavy‑duty process pumps.
Why API 610 BB5 for water injection?
The BB5 type is a radially split, multistage barrel casing pump, with between‑bearings rotor support. This design is preferred for oilfield water injection because:
The cylindrical barrel casing safely contains extremely high discharge pressures (up to 450 bar / 6500 psi).
Radial split construction allows the internal stage assembly to be removed as a cartridge while the barrel remains in the pipework.
Multistage design (3 to 20+ stages) achieves the high heads required for deep well injection (up to 4000 m).
Robust rotor dynamics ensure stable operation at variable speeds (VSD compatible).
Key design features
Barrel casing – Forged or cast steel certified to withstand full discharge pressure without leaks.
Multistage impeller/diffuser – Opposed or same‑direction impeller arrangement to balance axial thrust.
Between‑bearings rotor – Tilt‑pad or multi‑lobe journal bearings + heavy duty thrust bearing (Kingsbury type). Oil mist or forced lube optional.
API 682 seal compatibility – Cartridge mechanical seals (single, tandem or double) for water and saline service.
High pressure containment – Metal‑to‑metal fit between stages, with spiral wound gaskets or O‑rings.
Materials – Ductile iron / carbon steel (WCB/WCC), 12% chrome (CA6NM), stainless steel (304/316/410), or duplex for aggressive brine.
Temperature range – Up to 400°C (cooler water injection typical at ambient to 80°C).
Typical performance range (water injection duty)
| Parameter | Value |
|---|---|
| Flow rate | 50 – 3000 m³/h |
| Head | Up to 4000 m |
| Discharge pressure | Up to 450 bar |
| Temperature | Up to 400°C (ambient brine typical) |
| Speed | Up to 7000 rpm (with VSD) |
| Stages | 3 to 20+ |
Typical applications
Oilfield waterflood – High pressure injection into reservoir to maintain pressure and enhance oil recovery.
Produced water reinjection – Disposal of separated water back into formation, meeting environmental regulations.
Seawater injection – Offshore and onshore, with corrosion resistant materials for saline water.
Pressure maintenance in gas fields – Water or brine reinjection.
Industrial high pressure service – Boiler feed, hydraulic haulage, desalination.
Why choose our API 610 BB5 water injection pump?
Full API 610 compliance – Performance test, NPSH test, mechanical run test with vibration & temperature monitoring.
High efficiency – CFD optimized hydraulics reduce power consumption – critical for high‑MW injection pumps.
Long MTBR – Robust bearings, balanced axial thrust, and conservative hydraulic loading.
Corrosion resistant options – Duplex, super duplex, or 316SS for seawater and high chlorides.
Short lead time – Standard barrel pumps available; custom designs with competitive delivery.
Lower total cost – Competitive upfront price + long service intervals + quick spare parts.
Global support – Impellers, shafts, stage pieces, wear rings, barrels (if required) shipped worldwide.
Quality assurance
ISO 9001:2015 certified facility.
API 610 performance testing witnessed by third party as required.
Hydrostatic test of barrel casing at 1.5× working pressure.
Material traceability EN 10204 3.1 / 3.2.
NDE – MT, PT, UT, RT per customer specification.
Rotor dynamic analysis (lateral critical speeds) per API 610.
How to specify your water injection pump
Please provide: flow (m³/h), head (m), inlet pressure (bar), discharge pressure required (bar or psi), operating temperature (°C), specific gravity, dissolved solids / chlorides level (for material selection), NPSHa, and whether variable speed is planned. We will recommend stage count, material class, seal plan, bearing type, and driver details.
Contact us
For a quotation or technical discussion on water injection pumps (API 610 BB5):
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.