Overview
The mud bucket is a rig‑floor accessory used during tripping operations to prevent mud splash and spillage when disassembling drill pipe connections. When pipe joints are unscrewed, trapped drilling fluid can spray out, creating a hazardous, slippery work environment and wasting expensive drilling fluid. The mud bucket fits over the tool joint, seals around the pipe, and directs the escaping mud into a recovery line or container. It effectively recycles drilling fluid, keeps the platform clean, and enhances safety. The tool offers advantages of simple operation, robust construction, and easy maintenance.
Key Features
Prevents Mud Splash – Seals around the drill pipe, containing fluid during breakout.
Drilling Fluid Recovery – Captures and redirects fluid for reuse, saving cost.
Safety & Cleanliness – Reduces slip hazards and environmental pollution.
Quick Installation – Clamshell or split‑body design for easy placement over pipe.
Wide Size Range – Models FH2‑3/8 through FH6‑5/8 cover 2‑3/8″ to 6‑5/8″ drill pipe.
Durable Construction – Steel body with rubber seals for long service life.
Working Principle
The mud bucket consists of two hinged halves that close around the drill pipe just above the tool joint. Internal rubber seals contact the pipe body, forming a fluid‑tight chamber around the connection. A bottom seal rests on the tool joint shoulder. When the connection is broken, trapped mud flows into the bucket and exits through a discharge port to a recovery hose. After the fluid is drained, the bucket is opened and moved to the next connection.
Technical Specifications (Representative Model)
| Parameter | Specification |
|---|---|
| Outer Diameter (OD) | 273 mm (10-3/4″) |
| Overall Length (OAL) | 1826 mm (6 ft) |
| Drill Pipe Sizes | 2‑3/8″, 2‑7/8″, 3‑1/8″, 3‑1/2″, 4″, 4‑1/2″, 4‑3/4″, 5″, 5‑1/2″, 5‑7/8″, 6‑1/2″, 6‑5/8″ |
Note: Custom sizes for larger drill pipe or casing are available upon request – refer to the technical agreement for details.
Applications
Onshore and offshore drilling rigs during tripping (pulling out of hole)
Workover and completion operations
Any operation where drill pipe connections are broken under pressure or with trapped fluid
Environmental compliance requiring zero spillage of drilling fluids
Value Proposition
Cost Savings – Recovers expensive oil‑base or synthetic mud.
Safety – Reduces slips, falls, and environmental contamination.
Cleaner Platform – Minimizes mud on rig floor and equipment.
Time Efficient – Quick attach/release, no complex setup.
The FH series mud bucket is a simple, effective tool for every drilling rig. By containing and recovering mud during connections, it protects personnel, the environment, and the drilling budget.
Contact Us for model selection, sizing, or a quotation: info@hyrig.com
Mud Bucket – Catch the mud, save the fluid, keep the rig clean.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.