Wiper – Complete Product Introduction

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Wiper is an essential auxiliary tool in downhole operations. Its main functions are cleaning mud from the outer wall of drill pipe, protecting the pipe surface, and keeping the rig floor clean and safe. A clean drill stem allows easy inspection of scars, wear, or damage, enabling timely correction of potential accident hazards. Typically made of durable rubber or polyurethane, the wiper is placed over the drill pipe and strips off mud and debris as the pipe is pulled through it. Available in multiple sizes to fit common drill pipe diameters.

Conatct For Details
DetailReview(0)Additional

Overview
The wiper (also known as a drill pipe wiper or stripper rubber) is an essential auxiliary tool in downhole drilling and workover operations. Its primary function is to clean mud, drilling fluid, and debris from the outer wall of drill pipe as it is being pulled out of the hole. By removing this material, the wiper protects the drill pipe’s outer surface from corrosion and abrasion, and it keeps the rig floor significantly cleaner and safer. Additionally, a clean drill stem allows the crew to visually inspect the pipe for scars, wear, cracks, or other damage that could lead to downhole failures or accidents. Early detection of these hidden dangers enables timely corrective action, enhancing overall operational safety.

Key Features

  • Mud Removal – Effectively strips drilling fluid from the pipe OD during tripping.

  • Pipe Protection – Reduces corrosion and abrasive wear on the pipe surface.

  • Cleaner Rig Floor – Minimizes mud spillage, reducing slip hazards.

  • Inspection Enabler – Clean pipe surfaces reveal damage for quick assessment.

  • Durable Material – Made from oil‑resistant rubber or polyurethane for long service life.

  • Split‑Body Design – Easy to install and remove without disconnecting the pipe.

Working Principle
The wiper is installed over the drill pipe, typically at the rotary table or at the rig floor level. As the pipe is raised (tripping out), the wiper’s flexible lips or fingers scrape against the pipe’s outer wall, wiping off mud and cuttings. The debris falls into a collection pan or is directed away. The wiper’s tight but non‑damaging contact ensures efficient cleaning without scoring the pipe. After the pipe passes through, the wiper self‑centers for the next joint.

Technical Specifications (Typical)

ParameterSpecification
MaterialOil‑resistant rubber, polyurethane, or reinforced elastomer
Fit Drill Pipe Sizes2‑3/8″, 2‑7/8″, 3‑1/2″, 4″, 4‑1/2″, 5″, 5‑1/2″, 6‑5/8″ (others on request)
ConstructionSplit body or solid with center hole, usually hinged for easy wrapping
Temperature Range-20°C to +120°C (higher temp on request)

Note: Custom sizes and materials available – contact for details.

Applications

  • Onshore and offshore drilling rigs during tripping operations

  • Workover and well servicing where drill pipe is pulled

  • Any operation requiring clean, dry drill pipe before inspection or storage

Value Proposition

  • Safety – Reduces slip hazards from spilled mud and allows early detection of pipe damage.

  • Equipment Longevity – Removes corrosive mud, extending drill pipe life.

  • Environmental Compliance – Contains mud at the rig floor, reducing waste.

  • Low Cost, High Benefit – Simple tool with major impact on rig cleanliness and safety.

The wiper is a small but indispensable tool for any drilling or workover operation. By keeping drill pipe clean and the rig floor safe, it pays for itself in reduced cleanup time, extended pipe life, and accident prevention.

Contact Us for wiper sizes, material options, or a quotation: info@hyrig.com


Wiper – Clean pipe, safe floor, visible protection.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit