Overview
The hole opener is a downhole tool specifically designed to enlarge big surface holes in onshore and offshore oil fields. It serves two primary functions: first, it can enlarge a hole that has been pre‑drilled by a tricone bit to a larger diameter in a subsequent run; second, it can be connected directly above the drill bit to complete both drilling and enlarging operations in a single run (simultaneous drilling and opening). The hole opener is equipped with rolling cutter cones, and three cutter types are available to match different formation hardnesses: Type “SM” for soft to medium formations, Type “MH” for medium to hard formations, and Type “XH” for hard formations.
Key Features
Dual Function – Can be used as a separate enlarging run or in combination with a pilot bit for one‑trip drilling and opening.
Three Cutter Types – SM (soft–medium), MH (medium–hard), XH (hard) for optimal performance across all formations.
Wide Size Range – Working OD from 215.9 mm (8‑1/2″) up to 1066.8 mm (42″) for large surface hole applications.
Multiple Cutter Configurations – Available with 3, 4, or 6 cones (models KZ3, KZ4, KZ6) for stability and cutting efficiency.
API Connections – Standard NC38, 6-5/8 REG, and 7-5/8 REG connections for easy integration into the BHA.
Rugged Construction – Designed to withstand high torque and side loads encountered in large hole opening.
Working Principle
The hole opener is run on drill pipe or bottom hole assembly. When used as a separate enlarging tool, it is run after a pilot hole has been drilled by a smaller tricone bit. The hole opener’s cones (3, 4, or 6 rolling cutters) are arranged radially to cut a larger diameter than the pilot hole. As the tool rotates, the cones crush and shear the formation, enlarging the hole to the specified working OD. When used in combination with a drill bit (connected below the hole opener), the bit drills the pilot hole while the hole opener simultaneously enlarges the upper section – a technique that saves a separate trip. The cutter type (SM, MH, XH) is selected based on the formation hardness to maximize penetration rate and cutter life.
Technical Specifications
| Model | Working OD mm (inch) | ID mm (inch) | Body OD mm (inch) | Min Pilot Hole mm (inch) | OAL mm (ft) | Connection | Cutter Qty |
|---|---|---|---|---|---|---|---|
| KZ3‑215 | 215.9 (8-1/2) | 25.4 (1) | 120.7 (4-3/4) | 165.1 (6-1/2) | 1524 (5.0) | NC38 B×P | 3 |
| KZ3‑311 | 311 (12-1/4) | 38.1 (1-1/2) | 203 (8) | 216 (8-1/2) | 1524 (5.0) | 6-5/8 REG B×P | 3 |
| KZ3‑444 | 444.5 (17-1/2) | 57.2 (2-1/4) | 241.3 (9-1/2) | 266.7 (10-1/2) | 1752 (5.7) | 7-5/8 REG B×P | 3 |
| KZ3‑584 | 584 (23) | 76.2 (3) | 241.3 (9-1/2) | 355.6 (14) | 1753 (5.7) | 7-5/8 REG B×P | 3 |
| KZ3‑660 | 660.4 (26) | 76.2 (3) | 241.3 (9-1/2) | 444.5 (17-1/2) | 1753 (5.7) | 7-5/8 REG B×P | 3 |
| KZ3‑813 | 812.8 (32) | 76.2 (3) | 241.3 (9-1/2) | 444.5 (17-1/2) | 1850 (6.1) | 7-5/8 REG B×P | 3 |
| KZ4‑813 | 812.8 (32) | 76.2 (3) | 241.3 (9-1/2) | 444.5 (17-1/2) | 2540 (8.3) | 7-5/8 REG B×P | 4 |
| KZ4‑914 | 914.4 (36) | 89 (3-1/2) | 241.3 (9-1/2) | 444.5 (17-1/2) | 2650 (8.7) | 7-5/8 REG B×P | 4 |
| KZ6‑1067 | 1066.8 (42) | 76.2 (3) | 241.3 (9-1/2) | 660.4 (26) | 1955 (6.4) | 7-5/8 REG B×P | 6 |
Note: Custom specifications and other cutter configurations are available upon request – refer to the technical agreement for details.
Applications
Enlarging surface holes (conductor hole, surface casing hole) on onshore and offshore drilling rigs
Enlarging pilot holes pre‑drilled by tricone bits
Connected above a drill bit to perform simultaneous drilling and enlarging (one‑trip operation)
Suitable for soft to extremely hard formations with appropriate cutter selection (SM, MH, XH)
Value Proposition
Trip Reduction – Simultaneous drilling and enlarging eliminates a separate hole opening run, saving rig time.
Formation‑Matched Cutters – SM, MH, and XH types optimize ROP and cutter life across a wide range of rock hardness.
Large Diameter Capability – Opens holes up to 42″ (1067 mm) for big surface casing programs.
Stable Operation – 3‑, 4‑, or 6‑cone designs provide balanced cutting action and reduced vibration.
API Compatibility – Standard connections (NC38, 6-5/8 REG, 7-5/8 REG) fit most BHA configurations.
The hole opener is a versatile and essential tool for surface hole enlargement in oil and gas drilling. Whether used as a dedicated enlarging run or combined with a pilot bit for one‑trip drilling and opening, it delivers efficient, reliable performance across all formation types.
Contact Us
For technical data sheets, cutter type recommendations, or a quotation, please contact:
Email: info@hyrig.com
Hole Opener – Enlarge surface holes faster, with the right cutter for any formation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.