Overview
The replaceable sleeve stabilizer consists of two main components: a mandrel (central body) and a replaceable sleeve (outer wear sleeve with stabilizer blades). Its function is the same as that of a spiral integral blade stabilizer – to center the BHA, control well deviation, reduce vibration, and improve drilling performance. However, unlike integral stabilizers, the replaceable sleeve design offers two significant advantages: first, it can be adapted to different hole sizes by simply changing the sleeve; second, the stabilizer service life is greatly extended because only the worn sleeve needs to be replaced, not the entire tool. The sleeve is threaded onto the mandrel, ensuring a strong and reliable connection, and making replacement and assembly more convenient than other designs (e.g., slip‑on or welded sleeves).
Key Features
Two‑Piece Design – Mandrel + replaceable sleeve; same stabilization as integral blade stabilizers.
Hole Size Flexibility – One mandrel can accommodate multiple hole sizes by changing the sleeve.
Extended Service Life – Replace only the worn sleeve; mandrel is reusable, reducing long‑term costs.
Threaded Connection – Sleeve screws onto mandrel for reliable torque transmission and easy field replacement.
Convenient Assembly – Simple threading operation; no special tools required for sleeve change.
String & Near‑Bit Configurations – Available as string stabilizers (standard connections) and near‑bit (NB) stabilizers (shorter, with bit‑saving connections).
Wide Size Range – Models from 149.2 mm (5‑7/8″) to 711.2 mm (28″) working OD.
Working Principle
The replaceable sleeve stabilizer is placed in the BHA at the desired position. The mandrel has API connections on both ends (or a near‑bit connection on the lower end for NB models). The sleeve, which carries the stabilizer blades (usually spiral or straight), is threaded onto the mandrel and tightened to a specified torque. The blades contact the borehole wall, centralizing the drill string. When the blades become worn after extended use, the tool is pulled out, the worn sleeve is unscrewed, and a new sleeve (or a sleeve for a different hole size) is threaded onto the same mandrel. The mandrel can be reused many times, significantly reducing replacement costs. The threaded connection ensures no relative movement between mandrel and sleeve under high torque and vibration.
Technical Specifications (Selected Models)
| Model | Blade OD mm (inch) | ID mm (inch) | Body OD mm (inch) | Fishing Neck Length mm (inch) | Upper Connection | Lower Connection | Remark |
|---|---|---|---|---|---|---|---|
| KH149 | 149.2 (5-7/8) | 50.8 (2) | 120.7 (4-3/4) | 686 (27) | NC38 | NC38 | String |
| KH149NB | 149.2 (5-7/8) | 50.8 (2) | 120.7 (4-3/4) | 686 (27) | NC38 | 3-1/2 REG | Near Bit |
| KH152 | 152.4 (6) | 50.8 (2) | 120.7 (4-3/4) | 686 (27) | NC38 | NC38 | String |
| KH152NB | 152.4 (6) | 50.8 (2) | 120.7 (4-3/4) | 686 (27) | NC38 | 3-1/2 REG | Near Bit |
| KH216 | 215.9 (8-1/2) | 71.4 (2-13/16) | 165 (6-1/2) | 686 (27) | NC50 | NC50 | String |
| KH216NB | 215.9 (8-1/2) | 71.4 (2-13/16) | 165 (6-1/2) | 686 (27) | NC50 | 4-1/2 REG | Near Bit |
| KH311 | 311.15 (12-1/4) | 71.4 (2-13/16) | 203 (8) | 686 (27) | 6-5/8 REG | 6-5/8 REG | String |
| KH311NB | 311.15 (12-1/4) | 71.4 (2-13/16) | 203 (8) | 686 (27) | 6-5/8 REG | – | Near Bit |
| KH444 | 444.5 (17-1/2) | 76.2 (3) | 229 (9) | 686 (27) | 7-5/8 REG | 7-5/8 REG | String |
| KH444NB | 444.5 (17-1/2) | 76.2 (3) | 229 (9) | 686 (27) | 7-5/8 REG | – | Near Bit |
| KH660 | 660.4 (26) | 76.2 (3) | 241.3 (9-1/2) | 610 (24) | 7-5/8 REG | 7-5/8 REG | String |
| KH660NB | 660.4 (26) | 76.2 (3) | 241.3 (9-1/2) | 610 (24) | 7-5/8 REG | – | Near Bit |
| KH711 | 711.2 (28) | 76.2 (3) | 241.3 (9-1/2) | 650 (25-19/32) | 7-5/8 REG | 7-5/8 REG | String |
| KH711NB | 711.2 (28) | 76.2 (3) | 241.3 (9-1/2) | 650 (25-19/32) | 7-5/8 REG | – | Near Bit |
Note: Custom specifications and other sizes are available upon request – refer to the technical agreement for details.
Applications
Onshore and offshore drilling for oil, gas, and geothermal wells
Vertical, directional, and horizontal wells where different hole sections require different stabilizer ODs
Operations where extended stabilizer life and reduced tool inventory are desired
String stabilizers placed between drill collars; near‑bit (NB) stabilizers placed directly above the bit
Value Proposition
Inventory Reduction – One mandrel with multiple sleeves replaces several integral stabilizers, reducing capital expenditure.
Lower Operating Cost – Replace only the worn sleeve; mandrel lasts for many runs.
Hole Size Flexibility – Change sleeve to match different hole diameters without buying a new stabilizer.
Reliable Threaded Connection – No slippage or loosening under high torque and vibration.
Easy Field Maintenance – Sleeve replacement can be done on the rig floor with simple tools.
Same Performance as Integral Blade – Spiral or straight blade options available; identical stabilization effect.
The KH series replaceable sleeve stabilizer offers the same well deviation control and BHA stabilization as a conventional integral blade stabilizer, but with the added economy of replaceable sleeves. By using a single mandrel with multiple sleeve sizes, operators can reduce inventory, lower replacement costs, and quickly adapt to changing hole sizes – all while maintaining reliable, threaded connections.
Contact Us
For technical data sheets, sleeve selection, or a quotation, please contact:
Email: info@hyrig.com
Replaceable Sleeve Stabilizer – One mandrel, many sizes, longer service life.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.