Overview
The arrow type check valve (also known as drilling tool check valve) is a critical inside blowout prevention tool widely used in oil and gas drilling and workover operations. It is designed to run with the drilling tools into the wellbore. During the drilling or workover process, in the event of an overflow, well kick, or unexpected stop of positive circulation, the arrow type check valve shuts down rapidly under the combined action of reverse circulation pressure inside the drill tools and an integral spring force. Once closed, it cuts off the inner channel of the drilling tools, effectively preventing a blowout from propagating up through the drill string.
Key Features
Arrow Type Sealing Element – Specially shaped arrow plug provides rapid, positive sealing against reverse flow.
Spring‑Assisted Closure – An internal spring forces the valve shut as soon as forward flow ceases or reverses, ensuring fast response even at low reverse pressures.
Inside Blowout Prevention – Placed directly in the drill string, it stops high‑pressure oil, gas, or mud from flowing upward during a kick.
Reliable Operation – No external power or control lines required; fully automatic based on flow direction.
Wide Model Range – Nineteen models cover a broad spectrum of OD sizes (78 mm to 229 mm) and API connections.
Flexible Pressure Ratings – Working pressure from 35 MPa (5,000 psi) up to 70 MPa (10,000 psi) to suit different well conditions.
Working Principle
The arrow type check valve is installed in the drill string as part of the bottom hole assembly or at any desired location. Under normal forward circulation (drilling fluid pumped down the drill pipe), the arrow‑shaped plug is pushed open by the flow, allowing unrestricted passage of fluid. However, when a well kick occurs, formation pressure forces fluids (oil, gas, or brine) to flow upward inside the drill string. This reverse circulation pressure acts on the arrow plug. Simultaneously, the internal spring assists in pushing the plug into its seat. The combination of reverse pressure and spring force causes the valve to close rapidly and seal tightly, cutting off the inner bore of the drilling tools. This prevents the upward ejection of high‑pressure formation fluids, thereby containing the kick and preventing a blowout from within the drill string.
Technical Specifications
| Model | OD mm (inch) | ID mm (inch) | Connection (API) | Working Pressure MPa (psi) |
|---|---|---|---|---|
| FJ78 | 78 (3-1/16) | 25.4 (1) | 2-3/8 EUE | 35 (5,000) |
| FJ79 | 79 (3-1/8) | 25.4 (1) | 2-7/8 HT PAC | 35 (5,000) |
| FJ86 | 86 (3-3/8) | 25.4 (1) | NC26 | 35 (5,000) |
| FJ93 | 93 (3-43/64) | 25.4 (1) | 2-7/8 EUE | 35 (5,000) |
| FJ105 | 104.8 (4-1/8) | 41.3 (1-5/8) | NC31 | 35~70 (5,000~10,000) |
| FJ111 | 111 (4-3/8) | 41.3 (1-5/8) | NC31 | 35~70 (5,000~10,000) |
| FJ114 | 114 (4-1/2) | 41.3 (1-5/8) | 3-1/2 EUE | 35~70 (5,000~10,000) |
| FJ121 | 121 (4-3/4) | 54 (2-1/8) | NC38 | 35~70 (5,000~10,000) |
| FJ124 | 124 (4-7/8) | 50.8 (2) | HT38 | 35~70 (5,000~10,000) |
| FJ127 | 127 (5) | 54 (2-1/8) | NC38 | 35~70 (5,000~10,000) |
| FJ141 | 141 (5-9/16) | 54 (2-1/8) | 4-1/2 EUE | 35~70 (5,000~10,000) |
| FJ159 | 159 (6-1/4) | 70 (2-3/4) | NC46 | 35~70 (5,000~10,000) |
| FJ165 | 165 (6-1/2) | 70 (2-3/4) | NC50 | 35~70 (5,000~10,000) |
| FJ168 | 168 (6-5/8) | 70 (2-3/4) | NC50 | 35~70 (5,000~10,000) |
| FJ178 | 178 (7) | 70 (2-3/4) | 5-1/2 FH | 35~70 (5,000~10,000) |
| FJ184 | 184 (7-1/4) | 71.4 (2-13/16) | XT54 | 35~70 (5,000~10,000) |
| FJ203 | 203 (8) | 71.4 (2-13/16) | 6-5/8 REG | 35~70 (5,000~10,000) |
| FJ209 | 209 (8-1/4) | 70 (2-3/4) | 6-5/8 REG | 35~70 (5,000~10,000) |
| FJ229 | 229 (9) | 76.2 (3) | 7-5/8 REG | 35~70 (5,000~10,000) |
Note: Custom specifications and other connections are available upon request – refer to the technical agreement for details.
Applications
Oil and gas drilling operations (vertical, directional, horizontal, and HPHT wells)
Workover and completion operations where well control is critical
Installed as part of the drill string or bottom hole assembly
Used in wells with potential for kicks, swabbing, or loss of positive circulation
Provides inside blowout prevention (IBOP) capability at any point in the drill string
The arrow type check valve is particularly valuable in situations where a surface‑controlled IBOP may not be present or as a backup downhole safety device.
Value Proposition
Automatic Blowout Prevention – No human intervention required; valve closes instantly when reverse flow occurs.
Spring‑Assisted Reliability – Even low reverse pressure (e.g., slight swabbing) will trigger closure.
Compact & Rugged – Short length and full‑bore design when open; fits easily into BHA.
Wide Model Selection – Nineteen models cover nearly all common drill string sizes and connections, from slim holes to large diameter wells.
Cost‑Effective Well Control – An essential safety component that can prevent catastrophic blowout events.
The arrow type check valve (drilling tool check valve) is a simple, reliable, and automatic inside blowout prevention tool. By running this valve with the drill string, operators gain an additional layer of safety that responds instantly to reverse flow, cutting off the inner channel of the drilling tools and preventing blowouts from within.
Contact Us
For technical data sheets, model selection assistance, or a quotation, please contact:
Email: info@hyrig.com
Arrow Type Check Valve – Instant closure, automatic inside blowout protection.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.