Integral Blade Stabilizer – Complete Product Introduction

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Integral blade stabilizer is a critical downhole tool used in drilling operations to control well deviation. It stabilizes the drilling tools during oil, gas, and geological exploration drilling, resulting in increased bit service life, higher drilling speed, and improved well quality. Two types are available: spiral blade stabilizer and straight blade stabilizer. Models range from LX98 (98 mm working OD) to LX914 (914 mm working OD), with both string (standard) and near‑bit (NB) configurations. API connections include NC23, NC38, NC50, 3-1/2 REG, 4-1/2 REG, 6-5/8 REG, and 7-5/8 REG.

Conatct For Details
DetailReview(0)Additional

Overview
The integral blade stabilizer is an essential downhole tool in the drilling process, designed primarily to control well deviation. It stabilizes the drilling tools during oil, gas, and geological exploration drilling. By maintaining the drill string centered in the borehole, the stabilizer helps increase bit service life, improve drilling speed (rate of penetration), and enhance overall well quality. There are two types of integral stabilizers: spiral blade stabilizer (helical blades for better fluid flow and reduced torque) and straight blade stabilizer (axial blades for aggressive wall contact and directional control).

Key Features

  • Well Deviation Control – Maintains the drill string on the intended trajectory, reducing doglegs and unwanted angle changes.

  • Integral Construction – Blades are machined from a single piece of high‑strength steel; no welded or replaceable blades.

  • Two Blade Types – Spiral blades (reduced torque and stick‑slip) and straight blades (maximum lateral stiffness).

  • Increased Bit Life – Reduces lateral vibration and impact damage to drill bits.

  • Improved ROP – Stabilized BHA allows higher weight on bit and RPM without excessive vibration.

  • Wide Size Range – Working OD from 98 mm (3‑7/8″) to 914 mm (36″) for all hole sections.

  • String & Near‑Bit Configurations – String stabilizers placed in the BHA; near‑bit (NB) stabilizers mounted just above the bit for maximum deviation control.

Working Principle
The integral blade stabilizer is placed in the bottom hole assembly (BHA) at calculated positions. The blades make contact with the borehole wall, centralizing the drill string and preventing lateral movement. This centralization ensures that the drill bit receives consistent weight and torque, reducing wobbling and vibration. Spiral blade stabilizers have helical vanes that allow drilling fluid and cuttings to pass around the tool while still providing stabilization, which reduces rotational torque and the risk of differential sticking. Straight blade stabilizers have longitudinal blades that provide maximum lateral stiffness, ideal for aggressive directional control. The integral (one‑piece) construction provides high strength and resistance to wear, even in abrasive formations.

Technical Specifications (Selected Models)

ModelBlade OD mm (inch)ID mm (inch)Body OD mm (inch)Blade Width mm (inch)Blade Length mm (inch)Upper ConnectionLower ConnectionRemark
LX9898 (3-7/8)31.8 (1-1/4)79.4 (3-1/8)34 (1-11/32)240 (9-29/64)NC23NC23String
LX149149.2 (5-7/8)50.8 (2)120.7 (4-3/4)50.8 (2)305 (12)NC38NC38String
LX149NB149.2 (5-7/8)50.8 (2)120.7 (4-3/4)50.8 (2)305 (12)3-1/2 REG–Near Bit
LX152152.4 (6)50.8 (2)120.7 (4-3/4)50.8 (2)305 (12)NC38NC38String
LX152NB152.4 (6)50.8 (2)120.7 (4-3/4)50.8 (2)305 (12)3-1/2 REG–Near Bit
LX216215.9 (8-1/2)57.2 (2-1/4)165 (6-1/2)63.5 (2-1/2)406 (16)NC50NC50String
LX216NB215.9 (8-1/2)57.2 (2-1/4)165 (6-1/2)63.5 (2-1/2)406 (16)4-1/2 REG–Near Bit
LX311311.15 (12-1/4)71.4 (2-13/16)203 (8)76.2 (3)406 (16)6-5/8 REG6-5/8 REGString
LX311NB311.15 (12-1/4)71.4 (2-13/16)203 (8)76.2 (3)406 (16)––Near Bit
LX444444.5 (17-1/2)76.2 (3)241.3 (9-1/2)101.6 (4)508 (20)7-5/8 REG7-5/8 REGString
LX558558.8 (22)76.2 (3)241.3 (9-1/2)101.6 (4)508 (20)7-5/8 REG7-5/8 REGString
LX660660.4 (26)76.2 (3)241.3 (9-1/2)101.6 (4)508 (20)7-5/8 REG7-5/8 REGString
LX711711.2 (28)76.2 (3)241.3 (9-1/2)101.6 (4)508 (20)7-5/8 REG7-5/8 REGString
LX914914.4 (36)76.2 (3)241.3 (9-1/2)101.6 (4)508 (20)7-5/8 REG7-5/8 REGString

Note: NB models are near‑bit stabilizers (shorter, with connections optimized for placement directly above the bit). Spiral or straight blade types available for each model – specify when ordering.

Applications

  • Vertical, directional, and horizontal drilling in oil, gas, and geothermal wells

  • Geological exploration drilling

  • Placed in the BHA as string stabilizers (between drill collars) or as near‑bit stabilizers (directly above the bit)

  • All hole sizes from slim hole (98 mm) to large diameter surface holes (914 mm)

Value Proposition

  • Precise Deviation Control – Integral blades maintain gauge and centralization, reducing unwanted wellbore curvature.

  • Longer Bit Life – Reduced lateral vibration and impact damage extend bit runs.

  • Higher Drilling Speed – Stable BHA allows higher WOB and RPM, improving ROP.

  • Durable Integral Construction – No blades to break or replace; one‑piece steel body resists wear.

  • Spiral or Straight Options – Choose spiral for reduced torque and better hole cleaning; choose straight for maximum stiffness.

  • String & Near‑Bit Versatility – Multiple configurations to optimize BHA design for any drilling application.

The integral blade stabilizer is a fundamental tool for well deviation control and BHA stabilization. Whether using spiral blades for reduced torque or straight blades for aggressive directional control, operators can rely on the integral blade design to increase bit life, drilling speed, and overall well quality.

Contact Us
For technical data sheets, blade type selection, or a quotation, please contact:
Email: info@hyrig.com


Integral Blade Stabilizer – Control deviation, stabilize the string, drill faster.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit