Full Opening Safety Valve – Complete Product Introduction

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Full opening safety valve is a manual control valve installed in the drill string circulating system. It is one of the most effective tools for preventing blowout during drilling operations. To avoid malignant accidents, a full opening safety valve shall be connected between drill pipes. A special wrench rotates 90° to achieve on/off operation. As a precaution, when lifting drill pipes or when the kelly has not been lifted, it is recommended to install a full opening safety valve. Working pressure range 35–105 MPa (5,000–15,000 psi). Available in multiple models from QK79 to QK235 with API connections including NC26, NC31, NC38, NC40, NC46, NC50, 5-1/2 FH, and XT54.

Conatct For Details
DetailReview(0)Additional

Overview
The full opening safety valve is a manual control valve installed in the drill string circulating system. It is one of the most effective tools for preventing blowouts during drilling operations. To avoid malignant accidents such as loss of well control, a full opening safety valve shall be connected between drill pipes. When the need arises to lift drill pipes or when the kelly has not been lifted as a precaution, it is recommended to install a full opening safety valve. Using a special wrench, a 90° rotation of the valve switch achieves on/off operation quickly and positively.

Key Features

  • Full Opening Design – When open, the valve bore equals the drill pipe ID, providing no flow restriction for drilling fluid circulation.

  • Manual Operation – Simple 90° rotation with a special wrench opens or closes the valve; no external power required.

  • Blowout Prevention – Provides a positive shut‑off in the drill string during well kicks or pressure surges.

  • Precautionary Use – Ideal for situations when lifting drill pipes or when the kelly is not in place, maintaining a safety barrier at all times.

  • High Pressure Rating – Working pressure from 35 MPa to 105 MPa (5,000 psi to 15,000 psi) to suit a wide range of well conditions.

  • Multiple Models & Connections – Available in 11 models from QK79 to QK235 with various API connections (NC26, NC31, NC38, NC40, NC46, NC50, 5-1/2 FH, XT54, 2-7/8 HT PAC).

Working Principle
The full opening safety valve is typically a ball‑type valve. In the open position, the ball’s bore is aligned with the drill pipe ID, allowing unrestricted fluid flow. When a well control event occurs or when the drill string must be isolated, the operator inserts a special wrench into the valve’s operating mechanism and rotates it 90°. This rotation turns the ball 90°, sealing the bore and preventing fluid flow from either direction (bidirectional sealing). The valve is designed to hold full working pressure from above or below. Because the valve is full‑opening, there is no pressure drop or flow erosion when open – unlike reduced‑bore valves that can restrict circulation and increase surface pressures.

Technical Specifications

ModelOD mm (inch)ID mm (inch)Connection (API)Working Pressure MPa (psi)
QK7979.4 (3-1/8)20 (51/64)2-7/8 HT PAC35~105 (5,000~15,000)
QK8989 (3-1/2)30 (1-3/16)NC2635~105 (5,000~15,000)
QK111111 (4-3/8)40 (1-37/64)NC3135~105 (5,000~15,000)
QK121121 (4-3/4)50.8 (2)NC3835~105 (5,000~15,000)
QK127127 (5)50.8 (2)NC3835~105 (5,000~15,000)
QK133133.4 (5-1/4)50.8 (2)NC4035~105 (5,000~15,000)
QK159159 (6-1/4)71.4 (2-13/16)NC4635~105 (5,000~15,000)
QK165165 (6-1/2)71.4 (2-13/16)NC5035~105 (5,000~15,000)
QK168168 (6-5/8)71.4 (2-13/16)NC5035~105 (5,000~15,000)
QK190190 (7-1/2)76.2 (3)5-1/2 FH35~105 (5,000~15,000)
QK235235 (9-1/4)108 (4-1/4)XT5435~105 (5,000~15,000)

Note: Custom specifications and other connections are available upon request – refer to the technical agreement for details.

Applications

  • Installed between drill pipes as a precaution when lifting drill string or when the kelly is removed

  • Provides a manual shut‑off valve during well control events (kicks, swabbing, pressure surges)

  • Used in drilling operations (vertical, directional, horizontal, HPHT wells)

  • Suitable for both onshore and offshore drilling rigs

  • Can be placed at any point in the drill string where temporary isolation is required

Value Proposition

  • Full Bore Flow – No pressure drop or circulation restriction when open; maintains hydraulic efficiency.

  • Quick Operation – 90° rotation with a special wrench provides rapid closure in emergencies.

  • Reliable Well Control – Positive mechanical seal holds high pressure from either direction.

  • Precautionary Safety – Recommended practice to install when lifting drill pipes or when kelly is not in place, ensuring a safety barrier at all times.

  • Wide Compatibility – Multiple models and API connections fit most drill string sizes and thread types.

The full opening safety valve is an essential well control tool that every drilling operation should have readily available. By connecting this valve between drill pipes – especially as a precaution when lifting or when the kelly is not in place – operators add a critical layer of safety against blowouts and uncontrolled fluid release.

Contact Us
For technical data sheets, model selection guidance, or a quotation, please contact:
Email: info@hyrig.com


Full Opening Safety Valve – Full bore for circulation, full closure for safety.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit