Overview
The Inside BOP Valve is a specialized check valve designed for drill string and surface pumping systems. It features a large pressure drop across the valve and a tapered plug design. The tapered plug significantly reduces the cutting action (erosion) of drilling mud on the valve seat, ensuring that the valve maintains a correct closed position even after extended use in abrasive conditions. When connected to the drill string, the Inside BOP Valve protects critical surface equipment including the swivel, hose, and stand pipe from reverse flow or pressure surges. It can also be installed before the high pressure pump to prevent high pressure blowback or blowout. A dedicated release tool is provided to keep the valve normally open and to allow reverse flow to pass when needed. This release tool is pre‑installed in the valve, and the complete assembly is prepared on the drilling platform, enabling rapid installation on the drill string as soon as the first warning signal appears from the well.
Key Features
Tapered Plug Design – Reduces mud erosion on the seat, ensuring reliable sealing over many cycles.
Large Pressure Drop – Provides positive check action; designed to close quickly when reverse flow occurs.
Drill String Protection – When installed in the drill string, protects swivel, rotary hose, and stand pipe from back pressure.
Pump Protection – Installed before the high pressure pump, it prevents blowout or backflow that could damage pump components.
Normally Open with Release Tool – A dedicated release tool keeps the valve open during normal circulation and allows reverse flow (e.g., for well kill or circulation).
Rapid Deployment – The release tool is pre‑installed and the assembly is kept ready on the rig floor for immediate installation when well control signals appear.
Wide Pressure Range – Working pressure from 35 MPa to 70 MPa (5,000 psi to 10,000 psi) to suit many drilling applications.
Working Principle
The Inside BOP Valve is a check valve that allows fluid flow in one direction (downward into the drill string or into the pump) but blocks flow in the reverse direction. The tapered plug design ensures that when forward flow stops or reverses, the plug seats securely, creating a pressure‑tight seal. The tapered geometry also reduces the shearing or cutting action of high‑velocity mud against the seat, which is a common failure mode in conventional check valves.
A dedicated release tool (typically a mandrel or sleeve) is pre‑installed in the valve. This release tool mechanically holds the valve in the open position during normal drilling or pumping operations, allowing full forward flow and also permitting reverse flow if needed (e.g., when circulating from the annulus). When a well kick or other emergency occurs, the operator can remove the release tool (or it can be designed to release automatically under certain conditions), allowing the valve to function as a normal check valve – closing instantly when reverse flow is detected. The assembly is kept prepared on the drilling platform so that the Inside BOP Valve can be quickly stabbed into the drill string at the first sign of trouble.
Technical Specifications
| Model | OD mm (inch) | ID mm (inch) | Connection (API) | Working Pressure MPa (psi) |
|---|---|---|---|---|
| FP95 | 95 (3-3/4) | 35 (1-3/8) | NC26 | 35~70 (5,000~10,000) |
| FP111 | 111 (4-3/8) | 35 (1-3/8) | NC31 | 35~70 (5,000~10,000) |
| FP121 | 120.7 (4-3/4) | 45 (1-25/32) | NC38 | 35~70 (5,000~10,000) |
| FP159 | 159 (6-1/4) | 57.2 (2-1/4) | NC50 | 35~70 (5,000~10,000) |
| FP165 | 165 (6-1/2) | 57.2 (2-1/4) | NC50 | 35~70 (5,000~10,000) |
| FP178 | 178 (7) | 57.2 (2-1/4) | HT55 | 35~70 (5,000~10,000) |
Note: Custom specifications and other connections are available upon request – refer to the technical agreement for details.
Applications
Installed in the drill string to protect swivel, rotary hose, and stand pipe from reverse pressure
Installed before high pressure mud pumps to prevent blowout or backflow damage
Used as a rapid‑deployment well control tool – kept ready on the rig floor for immediate installation when well kicks are detected
Suitable for onshore and offshore drilling operations, including HPHT wells up to 70 MPa (10,000 psi)
Can be used in both drilling and workover applications where check valve protection is required
Value Proposition
Superior Erosion Resistance – Tapered plug design reduces mud cutting on the seat, ensuring longer service life and reliable closure.
Dual Protection – Protects both downstream surface equipment (swivel, hose, stand pipe) and upstream pump equipment.
Rapid Emergency Response – Pre‑assembled with release tool and kept on the rig floor for instant installation when well control signals appear.
Normally Open Convenience – Release tool keeps the valve open for normal operations and allows reverse flow when needed.
Wide Compatibility – Available with NC26, NC31, NC38, NC50, and HT55 connections to fit common drill strings and pump manifolds.
The Inside BOP Valve is a critical well control and equipment protection device. Its unique tapered plug design provides exceptional resistance to mud erosion, while the pre‑installed release tool allows the valve to be kept normally open for routine operations yet ready to close instantly when danger threatens. By installing this valve in the drill string or before the high pressure pump, operators gain an extra layer of safety against blowouts and equipment damage.
Contact Us
For technical data sheets, deployment procedures, or a quotation, please contact:
Email: info@hyrig.com
Inside BOP Valve – Tapered plug reliability, rapid emergency response.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.