Overview
The special stabilizer with reamer and back‑reamer is an essential downhole tool designed for well deviation control while also providing two‑way cutting capability. By effectively stabilizing the bottom hole assembly (BHA), it increases bit service life, improves drilling speed (ROP), and enhances overall well quality. Unlike conventional stabilizers, this tool has several cutting teeth specially fixed on both the upper end and the lower end of the crown, enabling both reaming (downward cutting) and back reaming (upward cutting). During drilling and tripping operations, it performs two‑way cutting, repairs the well wall, helps achieve an ideal well trajectory, and prevents the formation of dog legs. In particular, during the tripping process, hole shrinkage often makes it difficult to pull the BHA out of the hole. At this time, the back reaming teeth on the upper end can cut and eliminate the shrinkage, saving significant rig time and drilling costs.
Key Features
Two‑Way Cutting – Cutting teeth on both ends provide reaming (downward) and back reaming (upward) capability.
Well Deviation Control – Stabilizer blades centralize the BHA, maintaining trajectory and reducing dog legs.
Hole Shrinkage Prevention – Back reaming teeth eliminate tight spots when tripping out, preventing stuck pipe.
Wellbore Repair – Smoothes and gauges the wellbore during both drilling and tripping.
Increased Bit Life & ROP – Reduced vibration and improved stabilization extend bit life and increase penetration rate.
Multiple Models – HY152, HY216, HY311, HY444 with working OD from 152.4 mm to 444.5 mm.
Flexible Tooth Count – Available with 18 or 30 cutting teeth per model.
Working Principle
The HY series stabilizer is placed in the BHA as a string stabilizer or near‑bit stabilizer. The lower set of cutting teeth (on the bottom end of the crown) reams the hole while drilling downward, maintaining gauge and cutting any under‑gauge spots. The upper set of cutting teeth (on the top end of the crown) provides back reaming capability: when the BHA is pulled upward (tripping out), these teeth cut away any hole shrinkage, ledges, or tight spots that would otherwise cause the BHA to hang up. This two‑way cutting action continuously repairs the wellbore, keeping it smooth and in gauge. The stabilizer blades also contact the borehole wall to center the BHA, reducing lateral vibration and preventing dog leg formation. The result is a straighter, smoother wellbore with fewer tripping problems.
Technical Specifications
| Model | Blade OD mm (inch) | ID mm (inch) | Body OD mm (inch) | Blade Width mm (inch) | Blade Length mm (inch) | OAL mm (ft) | Connection | Teeth Qty Options |
|---|---|---|---|---|---|---|---|---|
| HY152 | 152.4 (6) | 50.8 (2) | 120.7 (4-3/4) | 51 (2) | 300 (11-13/16) | 1500 (4.9) | NC38 | 18 or 30 |
| HY216 | 215.9 (8-1/2) | 57.2 (2-1/4) | 165 (6-1/2) | 65 (2-9/16) | 440 (17-5/16) | 1720 (5.6) | NC50 | 18 or 30 |
| HY311 | 311.15 (12-1/4) | 71.4 (2-13/16) | 203 (8) | 75 (2-15/16) | 460 (18-7/64) | 1800 (5.9) | 6-5/8 REG | 18 or 30 |
| HY444 | 444.5 (17-1/2) | 76.2 (3) | 229 (9) | 120 (4-3/4) | 480 (18-7/8) | 2200 (7.2) | 7-5/8 REG | 18 or 30 |
Note: Custom specifications and other tooth counts are available upon request – refer to the technical agreement for details.
Applications
Vertical, directional, and horizontal drilling where hole shrinkage or ledges are expected
Wells with unstable formations prone to swelling, creep, or caving
Tripping operations where BLA (bottom hole assembly) hang‑ups are common
Onshore and offshore drilling, workover, and deepwater applications
Used as a string stabilizer or near‑bit stabilizer with added reaming/back reaming function
Value Proposition
Eliminates Hole Shrinkage Tripping Problems – Back reaming teeth cut away restrictions, allowing smooth tripping out.
Prevents Dog Legs – Continuous two‑way cutting keeps the wellbore smooth and straight.
Saves Rig Time & Cost – Reduces non‑productive time spent working pipe free or reaming tight spots.
Extends Bit Life – Stabilization reduces vibration, protecting bit cutting structures.
Improves Well Quality – A smoother, in‑gauge borehole improves cementing, logging, and completion operations.
Two‑in‑One Tool – Combines stabilization with reaming/back reaming, eliminating separate tools.
The HY series special stabilizer with reamer and back‑reamer is a unique downhole tool that goes beyond simple stabilization. By adding cutting teeth on both ends, it actively repairs the wellbore during drilling and tripping, preventing hole shrinkage, dog legs, and stuck pipe. This saves valuable rig time and reduces drilling costs.
Contact Us
For technical data sheets, tooth count recommendations, or a quotation, please contact:
Email: info@hyrig.com
Special Stabilizer with Reamer & Back‑Reamer – Two‑way cutting for a smoother wellbore, faster tripping, and lower costs.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.