The OH6 pump is an API 610 horizontal single-stage overhung process pump with a separate baseplate and flexible coupling configuration. It is the standard choice for variable speed, VFD-driven, independent motor installation projects. Unlike close-coupled pumps (OH1), fixed high-temperature designs (OH2), or integral gear high-speed pumps (OH5), the OH6 offers maximum flexibility for applications where flow and head must vary over time. Below we compare the OH6 against OH1, OH2, and OH5 pumps to help you select the right pump for variable speed service.
Core Advantages of OH6 Pump
Separate Baseplate & Flexible Coupling → Easy Alignment, Less Vibration
The pump and motor are independently mounted on a common baseplate with a flexible coupling. This allows precise alignment at installation and accommodates minor thermal growth during operation. Vibration levels are lower compared to close-coupled designs.
Perfect Match with VFD Variable Speed → Adjust Flow/Head Freely
Designed to operate across a wide speed range (typically 20–100% of rated speed). Speed changes do not compromise bearing or seal life. VFD allows flow and head adjustment without control valves, saving energy and reducing wear.
Foot / Centerline Mounting Optional → Fit Normal & High Temp Conditions
Foot-mounted version for general service (≤200°C). Centerline-mounted version for high temperature service (up to 380°C+), where thermal expansion would otherwise cause misalignment.
Back Pull-Out Design → Easy Maintenance Without Pipe Disconnection
The entire rotating assembly (impeller, shaft, bearings, seal) can be removed from the rear while the casing and piping remain in place. Significant downtime reduction.
Modular Structure → Easy Replacement of Motor and Spare Parts
Standard NEMA/IEC motors can be used. Motors can be replaced without pump disassembly. Spare parts are interchangeable across many OH6 models.
OH6 vs OH1 (Close-Coupled, Fixed Speed)
| Feature | OH6 (Separate Coupled) | OH1 (Close-Coupled) |
|---|---|---|
| Motor connection | Flexible coupling | Motor bolted directly to pump |
| VFD compatibility | Excellent | Poor (direct drive, limited speed range) |
| Alignment | Adjustable | Factory set, no adjustment |
| Motor replacement | Easy (unbolt coupling) | Difficult (pump disassembly often required) |
| Vibration | Lower (coupling isolates) | Higher (motor rotor and pump rotor on same shaft) |
| Best for | Variable speed, VFD control | General fixed-speed service |
Verdict: Use OH6 when you need VFD control or expect to vary speed. Use OH1 for simple fixed-speed, low-cost applications.
OH6 vs OH2 (Centerline Mounted, Fixed High Temperature)
| Feature | OH6 (Separate Coupled) | OH2 (Centerline Mounted) |
|---|---|---|
| Mounting | Foot or centerline (optional) | Centerline only |
| Speed capability | Variable (VFD) | Fixed speed (or limited VFD) |
| High temperature | Up to 380°C (with centerline mount option) | Up to 425°C (standard) |
| Flexibility | High (easy motor change, VFD) | Lower (optimized for fixed high temp) |
| Best for | Variable flow/head, moderate to high temp | Fixed high temperature process |
Verdict: Use OH6 if you need VFD flexibility. Use OH2 if you have a strictly fixed-speed, high temperature (>350°C) continuous duty.
OH6 vs OH5 (Integral Gear Drive, High Speed)
| Feature | OH6 (Separate Coupled) | OH5 (Integral Gear Drive) |
|---|---|---|
| Speed range | Normal speed (1,000–3,600 rpm) | High speed (3,000–12,000+ rpm) |
| Head at low flow | Moderate (up to 350 m) | Very high (up to 450+ m) |
| Footprint | Larger (separate motor) | Very compact (integral gear) |
| Cost | Lower (no gearbox) | Higher (precision gears) |
| VFD compatibility | Excellent | Limited (gearbox ratio fixed) |
| Best for | General variable speed, medium head | High head, low flow, limited space |
Verdict: Use OH6 for normal speed variable speed applications where head is moderate. Use OH5 when you need extremely high head at low flow or very compact footprint.
Best Applications for OH6 Pump
Refinery process transfer with VFD (crude, products, tank farm)
Petrochemical variable flow circulation (reactor loops, reflux)
Power plant cooling water with load following
Chemical batch production and adjustable process flow
Water supply booster and pipeline pressure control
Get an OH6 Pump vs OH1/OH2/OH5 Comparison for Your Duty
Our engineering team provides free pump selection advisory. Send us your duty point:
Flow rate (m³/h or GPM) – rated and minimum
Total head (m or ft) – rated and minimum
Operating temperature (°C)
Fluid name (and any corrosivity)
Desired speed range or VFD requirements
We will reply within 24 hours with:
Recommended pump type (OH6, OH1, OH2, or OH5)
Side-by-side comparison for your specific duty
Performance curves at multiple speeds
API 610 data sheet and CAD drawing
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1, OH2, OH3, OH4, OH5, OH6, BB1, BB2, BB3, BB4, BB5, VS types) serving global refineries, petrochemical plants, chemical facilities, power utilities, and water systems. Contact us for custom-engineered OH6 variable speed coupled pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.