OH6 Pump Technical Specifications – API 610 Variable Speed Overhung Pump with Flexible Coupling

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
OH6 pump API 610 horizontal single-stage overhung pump with separate baseplate and flexible coupling for variable speed drive. Performance: flow 5–2400 m³/h, head 10–350 m, speed 980/1480/2980 rpm (VFD adjustable), temperature -40°C to 380°C, max pressure 30 bar, low NPSH design. Structure: horizontal overhung (OH6), foot or centerline mounted, flexible coupling with separate motor base, radial split casing with back pull-out, closed/semi-open impeller, heavy-duty oil lubricated bearings, API 682 cartridge seal. Materials: cast iron/carbon steel/316L/duplex casing; 304/316L/duplex/high chrome impeller; forged alloy shaft; anti-corrosion wear parts. Documents: API data sheet, installation drawing, performance curve, 3D model, material certificate.

Conatct For Details
DetailReview(0)Additional

This page provides complete technical parameters for our OH6 API 610 horizontal single-stage overhung process pump, designed with a separate baseplate and flexible coupling configuration for variable speed drive (VFD) applications. The OH6 offers the flexibility of independent motor mounting, allowing speed adjustment to match varying flow and head process demands in refineries, petrochemical plants, chemical facilities, and power utilities.


Performance Range

ParameterValue
Flow rate5 ~ 2,400 m³/h (22 ~ 10,600 GPM)
Total head10 ~ 350 m (33 ~ 1,150 ft)
Speed980 / 1,480 / 2,980 rpm (VFD adjustable – 20% to 100% of rated speed)
Medium temperature-40°C ~ +380°C (-40°F ~ +716°F) – higher with centerline mount
Max design pressureUp to 30 bar (435 psi) – higher on request
NPSHrOptimized low NPSH hydraulic design (inducer optional)

Structure & Mechanical Design

  • Type: Horizontal single-stage overhung (API 610 OH6 designation)

  • Mounting: Foot mounted (standard) or centerline mounted (for high temperature service >200°C) – optional

  • Connection: Flexible coupling – pump and motor mounted on a common baseplate with separate motor base; accommodates VFD operation and thermal expansion

  • Casing: Radial split, back pull-out structure – rotating assembly removable without disconnecting piping

  • Impeller: Closed (clean fluids) or semi-open (slight solids) – single suction

  • Bearings: Heavy-duty oil lubricated bearing housing (splash or forced feed options)

  • Seal: API 682 cartridge mechanical seal – supports all plans (11, 21, 23, 31, 52, 53A/B/C, 54, etc.)


Material Options

ComponentStandard MaterialsUpgrade Options
CasingCast iron, carbon steel (WCB), 316LDuplex, super duplex
Impeller304, 316L stainless steelDuplex, high chrome alloy, bronze
ShaftForged alloy steel (high rigidity, 4140 grade)316L, duplex, K500
Wear partsReplaceable anti-corrosion alloyColmonoy-coated, Stellite

Key Design Features Explained

Separate Baseplate + Flexible Coupling
Unlike close-coupled or integral gear pumps, the OH6 uses a standard electric motor mounted on the same baseplate but with a flexible coupling. This allows:

  • Use of any NEMA/IEC motor (standard or VFD-rated)

  • Easy motor replacement without pump disassembly

  • Accommodation of minor misalignment and thermal growth

  • VFD operation without special pump modifications

Back Pull-Out Maintenance
The entire rotating assembly (impeller, shaft, bearing housing, mechanical seal) can be removed from the rear while the casing and piping remain in place. Maintenance downtime is significantly reduced.

VFD Compatibility
Designed for variable speed operation across a wide range (typically 20–100% of rated speed). Bearing and seal designs accommodate the pressure and temperature variations that occur during speed changes.

Centerline Mount Option
For high temperature service (>200°C), the centerline mounted option ensures even thermal expansion without misalignment.


Available Technical Documents (Free Request)

  • API 610 data sheet (filled with your operating conditions)

  • Installation dimension drawing (2D CAD, PDF/DWG) – includes baseplate layout, coupling guard details

  • Performance curve (head, efficiency, NPSHr vs flow at 2–3 different speeds)

  • 3D model (STEP/IGES for plant integration)

  • Material certificate (EN 10204 3.1 or 3.2)

  • Hydrostatic and performance test report


Typical Applications

  • Refinery process transfer (variable flow crude and product pumps)

  • Petrochemical variable flow circulation (reactor loops, reflux)

  • Power plant auxiliary systems (cooling water with load following)

  • Chemical medium pumping with VFD process control

  • Pipeline boosting (variable demand stations)

  • Tank farm transfer (loading/unloading with flow adjustment)


Get Your OH6 Pump Technical Specification Package

To request a complete documentation package with a formal quotation, please send us your operating conditions:

  • Flow rate (m³/h or GPM) – rated and minimum

  • Total head (m or ft) – rated and minimum

  • Fluid name and temperature (°C)

  • Desired speed range or VFD information

  • Any special requirement (material, seal plan, centerline mount, ATEX, etc.)

Our engineering team will respond within 24 hours with:

  • Recommended OH6 pump model (size, impeller trim, mounting type)

  • Performance curves at multiple speeds

  • API 610 data sheet

  • 2D CAD drawing and 3D model link

  • VFD compatibility recommendations

  • Factory direct price (EXW / FOB / CIF)

Email: info@hyrig.com

We are a professional API 610 pump manufacturer (OH1, OH2, OH3, OH4, OH5, OH6, BB1, BB2, BB3, BB4, BB5, VS types) serving global refineries, petrochemical plants, chemical facilities, power utilities, and pipeline operators. Contact us for custom-engineered OH6 variable speed pumps at factory direct wholesale pricing.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit