| Series | Valve Type | Max Pressure | Max Flow (L/min) | Control Type |
|---|---|---|---|---|
| DBETR Series | Relief Valve | 31.5 MPa | 10 | Direct with feedback |
| DBET/DBETE Series | Relief Valve | 35 MPa | 2 | Direct without feedback |
| DBE/DBEM Series | Relief Valve | 31.5 MPa | 600 | Pilot-operated |
| 3DREP6 Series | Reducing Valve | 10 MPa | 15 | Direct 3-way |
| DRE/DREM Series | Reducing Valve | 31.5 MPa | 300 | Pilot-operated |
Data source: Technical data table.
Used in injection molding machines, hydraulic presses, and testing equipment where precise, programmable pressure control is required.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing between a relief valve or reducing valve, or selecting the correct pressure range? Contact our engineers with your system specifications.
Q: What is the difference between a proportional relief valve and a reducing valve?
A: A relief valve limits the maximum pressure in the main system. A reducing valve lowers the pressure in a specific branch circuit.
Q: Do I need an amplifier?
A: Yes, all proportional pressure valves require a matching electronic amplifier (VT series) to convert the command signal into solenoid current.
Q: What is the advantage of the DBETR over the DBET?
A: The DBETR has an integrated position sensor that provides closed-loop feedback, resulting in higher precision and better repeatability.
For proportional pressure valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.